Abstract:Aiming to unraveling the effects and mechanisms of Nb and Fe additions on glass-forming ability (GFA) and magnetic properties, especially coercivity (H c) on Co-based metallic glasses, 2–4 at% Nb and/or 7.15–28.6 at% Fe have been alloyed into a Co71.5Gd3.5B25 alloy by substitution of Co. The results show that alloying either Nb or Fe into the base alloy leads to enhanced stability of supercooled liquid and GFA, and bulk metallic glass (BMG) can be formed for the alloy with 4 at% Nb or 28.6 at% Fe. Combined addition of Nb and Fe further improves the thermal stability and GFA, and lowers viscosity in supercooled liquid state. A (Co0.6Fe0.4)67.5Gd3.5Nb4B25 BMG possess a wide supercooled liquid region (ΔT x) of 85 K, critical sample diameter of 3.0 mm, and minimum viscosity coefficient of 2 × 108 Pa∙s. The enrichment of Fe increases saturation magnetic flux density (B s), H c, and saturation magnetostriction coefficient (λ s) of the (Co, Fe)-Gd-B-(Nb) metallic glasses; the addition of Nb effectively inhibits the deterioration of magnetic softness caused by Fe while reducing the B s. The (Co0.6–0.9Fe0.1–0.4)67.5Gd3.5Nb4B25 BMGs possess good soft magnetic properties with the B s and H c ranging 0.43–0.69 T and 2.3–5.0 A/m, respectively. Ab initio molecular dynamics simulations indicated that alloying Fe into the Co-based metallic glasses leads to enhanced magnetic anisotropy energy. The increased magnetic anisotropy arising from enlarged λ s results in the increased H c. The combination of high GFA, large ΔT x, low viscosity, and good soft magnetic properties makes the Co-based Co-Fe-Gd-Nb-B BMGs highly promising for applications as micro electromagnetic devices produced through thermoplastic forming.

Fe-based bulk metallic glasses used for magnetic shielding

Nd60Fe30−xNixAl10 Bulk Metallic Glasses with High Hard Magnetic Properties

Soft Magnetic Ternary Iron-Boron-based Bulk Metallic Glasses

Formation and Corrosion Properties of Fe-based Bulk Metallic Glasses

Ductile FeNi-based bulk metallic glasses with high strength and excellent soft magnetic properties

Development of high Bs FeNiBSiNb bulk metallic glasses by using combined CALPHAD and experimental approaches

Effect of partial substitution of Cr with Co on glass forming ability, mechanical and magnetic properties in Fe48Mo14Cr15-xCoxB6P8Si7Y2 bulk metallic glasses

Glass Forming Ability And Magnetic Properties Of (Fe68b25nd7)(96)Nb-4 Bulk Metallic Glass

Formation of Bulk Metallic Glasses in the Fe–M–Y–B (M = Transition Metal) System

Design and Characterisation of Metallic Glassy Alloys of High Neutron Shielding Capability

PREPARATION AND PROPERTIES OF BULK AMORPHOUS Fe-Ni-P-B-Ga ALLOYS

Co- and Fe-based multicomponent bulk metallic glasses designed by cluster line and minor alloying

Co-Based Bulk Metallic Glasses with Good Soft-Magnetic Properties and High Strength

Soft magnetic (Fe, M)–Y–B (M=Co or Ni) bulk metallic glasses

Thermal, magnetic and mechanical properties of (Fe 1 − x Co x ) 68 Dy 6 B 22 Nb 4 bulk metallic glasses

Ductile Co-based Bulk Metallic Glass with Superhigh Strength and Excellent Soft Magnetic Properties Induced by Modulation of Structural Heterogeneity

Preparation of Bulk Amorphous Fe–Ni–P–B–Ga Alloys from Industrial Raw Materials

Fe–C micro-alloying effect on properties of Zr53Al11.6Ni11.7Cu23.7 bulk metallic glass

Preparation and properties of new non-magnetic Co-based bulk metallic glasses

Effects and mechanisms of Nb and Fe additions on glass-forming ability and magnetic properties of a Co71.5Gd3.5B25 metallic glass

Hf-based bulk metallic glasses with critical diameter on centimeter scale