Abstract:Based on the principles of soil mechanics, a theoretical calculation method for computing the reverse torque of Earth Pressure Balanced shield driving in soft ground was derived by considering lots of relative factors, including the resistant moments induced by soft soil around shield body, the gravity of shield and segments left in shield, and the reaction force of jack thrust. The theoretical calculation method was verified through a case history of a metro tunnel section in Hangzhou soft ground. The reverse torques calculated by the proposed method are approximately 18.9 to 16 times of the measured cutting torques, which implies that the inherent reverse torque of shield can effectively prevent the shield from rolling during the advancing process. In the start stage, although the theoretical calculated reverse torques were still larger than the measured torques, they have low safe factors. A simple but effective method was proposed to prevent shield from rolling in the start stage in the improved ground. Its effectiveness was verified successfully in actual engineering practice. Due to the viscous of soft soils, slight rolling angles of shield body were observed when the cutter head was rotating in one single direction during the advancing process. The rolling angles can be effectively eliminated by adjusting the cutter head in the opposite direction.

Prediction of the Amount of Soil Discharged by an Earth Pressure Balanced Shield Machine Based on Feature Engineering

Earth Pressure Multipoint Prediction For Eps Shield Based On Multi-Model Ensemble

ANALYSIS OF GROUND SURFACE DISPLACEMENT AND HORIZONTAL MOVEMENT OF DEEP SOILS INDUCED BY SHIELD ADVANCING

Analysis of reverse torque of EPB shield tunneling in soft ground

Intelligent Control for Earth Pressure in Chamber of Earth Pressure Balance Shield Machine Based on Multi-system Coordination

Identification of Abnormal Operating Conditions and Intelligent Decision System

Control model of earth pressure balance for shield tunneling

Earth Pressure Balance Control for EPB Shield

Modeling and Analysis of Thrust Force for Epb Shield Tunneling Machine

Total Thrust Calculation and Test Research for Soil Pressure Balancing Shield Tunneling

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Analysis on Soil Discharging Control of Auger Conveyor on Soil Pressure Balancing Shield

Determination of the Cutterhead Torque for EPB Shield Tunneling Machine

Study on Design Theory and Method of Geology Adaptability for Earth Pressure Balanced Shield Tunneling Machine

Earth Layer Recognition During the Shield Machine Digging and Control Strategy of the Cutter Head Speed

RESEARCH ON SOIL DEFORMATION DURING SHIELD CONSTRUCTION PROCESS

Ground Surface Deformation Control Based on Chamber Pressure Direct Feedback

STUDY ON SOIL-COMPACTING EFFECTS INDUCED BY EARTH PRESSURE BALANCE SHIELD CONSTRUCTION

Research of EPB Shield Tunneling Parameter Relations and Their Influence on Stratum Displacement

Prediction of Longitudinal Ground Deformation Due to Tunnel Construction with Shield in Soft Soil

Prediction Of Soil Settlement Induced By Double-Line Shield Tunnel Based On Peck Formula