Abstract:An electrostatically-driven microelectromechanical systems (MEMS) based pyramidal-polygonal micro-scanner is developed for circumferential-scanning endoscopic probes. In this paper, an endoscopic optical coherence tomography (OCT) probe is proposed, which utilizes multiple parallel incident light beams to drastically reduce the required mechanical rotation angle to achieve near 360-degree circumferential scanning. Manual assembly is employed to construct this micro scanner, which combines a silicon micromachined MEMS actuator with four sets of electrostatic comb-drives and a polymer-based pyramidal-polygonal micro-reflector. The pyramidal-polygonal micro-reflector is developed using a combination of high-precision diamond turning and soft lithography molding technologies. The measured average surface roughness and root-mean-square roughness of the diamond turned mold are 7.02 nm and 9.02 nm respectively, and those of the PDMS casted polygon micro-reflector with an Au coating are 48.95 nm and 61.90 nm respectively. Since near-infrared light sources with wavelengths ranging from 930 nm to 1550 nm are typically utilized for OCT applications, the surface roughness of the polygon reflector is better than λ/10 of the operating wavelength indicating that its quality meets the requirement of the OCT bio-imaging applications. An overall optical scan angle of near-360 degrees is demonstrated experimentally at a resonant frequency of 180 Hz with 80 Vpp ac driving voltage. The proposed MEMS scanner offers an alternative solution for circumferential scanning in endoscopic OCT probes owing to its advantages of compact design, fast scanning speed and low operational power consumption.

Aerosol jetted PZT actuated fiber MEMS scanner for potential microscopic imaging

Mirrorless MEMS imaging: a nonlinear vibrational approach utilizing aerosol-jetted PZT-actuated fiber MEMS scanner for microscale illumination

A large-scan-angle piezoelectric MEMS optical scanner actuated by a Nb-doped PZT thin film

Electrostatic Micromachined Resonating Micro-Scanner for Circumferential Endoscopic Bio-Imaging

Electrostatic MEMS Resonating Micro-Polygonal Scanner for Circumferential Endoscopic Bio-Imaging

MEMS Electrostatic Double T-Shaped Spring Mechanism for Circumferential Scanning

Fabrication and characterization of MEMS piezoelectric synthetic jet actuators with bulk-micromachined PZT thick film

3.8×3.8 mm2 Tiny Piezoelectric Resonant MEMS Scanner Using Fork-Shaped and Ring-Shaped Actuators

3.8×3.8 mm2 compact piezoelectric resonant MEMS scanner using fork-shaped and ring-shaped actuators

A Miniature Lens Scanner with an Electrothermally-Actuated Micro-Stage

A Silicon Optical Bench-Based Forward-View Two-Axis Scanner for Microendoscopy Applications

New Endoscopic Imaging Technology Based on MEMS Sensors and Actuators

Polygonal Pyramidal Reflector-Based Micromachined Microscanners for Bioimaging

A fiber scanner based on a robust Cu/W electrothermal MEMS stage

Design And Optimization Of Micro Scanner Driven By Folded Piezoelectric Unimorph Actuators Using Pzt Films

A non-resonant fiber scanner based on an electrothermally-actuated MEMS stage

On the Design of Piezoelectric actuator for 1D MEMS scanning mirror applications

Modeling and Measurement of a Miniature Piezoelectric Ceramic Tube Fiber Scanner for Two-Photon Endomicroscopy

A 3D-printed 3D actuator for miniaturized laser scanning probes

Double spiral resonant MEMS scanning for ultra-high-speed miniaturized optical microscopy

Metallic Glass as a Mechanical Material for Microscanners