Abstract:The application of cold spray (CS) for 316L stainless steel (SS) has been an increasingly popular process in recent years. However, defects in the form of porosity hamper their frictional resistance. In an effort to enhance the frictional resistance of CS 316L SS, novel indirect-laser surface texturing without confinement (ILSTwC) and direct-laser surface texturing without confinement (DLSTwC) processes are introduced as viable surface texturing, densifying, and strengthening techniques. These techniques operate by taking advantage of the severe plastic deformation and heating kinetics of a pulsed laser to an externally applied mesh, thus creating a surface texture that is highly dense and work-hardened. For the ILSTwC treatment, utilizing a laser intensity of 6.13 GW cm − 2 led to significant changes in surface properties. Compared to the non-textured CS surface, there was a 24.1% increase in surface roughness, a notable 262.2% increase in surface skewness, a 26.0% increase in surface hardness, and a substantial 54.4% decrease in frictional response. For the DLSTwC treatment at the same laser intensity, the surface properties exhibited contrasting behavior. There was a remarkable 80.4% reduction in surface roughness, accompanied by a 63.6% increase in surface skewness, a 26.4% increase in surface hardness, and a significant 65.1% decrease in frictional response compared to the non-textured CS surface. Between the ILSTwC and DLSTwC surfaces, the DLSTwC surface had the greatest reduction in friction due to the lessened tribological contacts from the negatively skewed surface. Based on these findings, this work indicates that laser surface texturing has an influential effect on enhancing surface hardness and density and is indeed a viable technique to control the tribological performance of harder materials such as CS 316L SS.

Supersonic Laser Deposition of Self-Lubricating Coatings

Universal and Stable Slippery Coatings: Chemical Combination Induced Adhesive-Lubricant Cooperation

Combining Carbon Nanoparticle Coatings and Laser Surface Texturing for Enhanced Lubricity Under High Loads

Effects of diamond size on the deposition characteristic and tribological behavior of diamond/Ni60 composite coating prepared by supersonic laser deposition

Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray

Design of Metal-Based Slippery Liquid-Infused Porous Surfaces (slipss) with Effective Liquid Repellency Achieved with a Femtosecond Laser

Analysis of the lubrication process with composition of solid lubricants of laser-modified sliding surfaces

Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering

Microstructural Optimization and Anti-Wear Performance of Supersonic Atmospheric Plasma Sprayed Nickel Based Self-Lubricating Coatings under Heavy Load

Microstructure Characteristics and Tribological Properties of Gradient Cu-MoS2 Self-Lubricating Coating Fabricated by Selective Laser Melting of Ink-Printed Metal Nanoparticles

Electrodeposited MoxSyOz/Ni Tribological Coatings

Microstructural and tribological properties of high-performance Inconel 625 alloy-WS 2 self-lubricious composite coating by laser assisted cold spray

One-step preparation of high performance Ni-MoS2 self-lubricating coatings via jet electrodeposition on additive manufactured aluminum alloy

Feasibility of Multilayer Solid-State Deposition via Lateral Friction Surfacing for Metal Additive Manufacturing

Biomimetic lubricant-grafted surfaces on laser-textured microwell arrays with multifunctionality

Microstructure and Properties of Metallic Coatings with Low Dilution Ratio by High Speed Laser Cladding

Magnesium Silicate Hydroxide–MoS2–Sb2O3 Coating Nanomaterials for High-Temperature Superlubricity

Chemical Vapor Deposition and Atomic Layer Deposition of Coatings for Mechanical Applications

Realizing the tribological feasibility of novel laser surface texturing techniques for cold spray kinetically metallized stainless steel

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Surface Composition–lubrication Design of Al2O3/Ni Laminated Composites – Part II: Tribological Behavior of LaF3-doped MoS2 Composite Coating in a Water Environment