Abstract:Aiming at the unsatisfactory low-frequency sound absorption effect of Helmholtz resonator, a novel broadband low-frequency ventilation absorber with rough neck is proposed. The roughness is introduced into the neck of Helmholtz resonator to change the shape of the neck and achieve the structure of rough neck Helmholtz resonator. The proposed absorber can effectively provide the acoustic impedance required for low-frequency sound absorption without changing the overall size, thereby reducing the resonant frequency. The finite element method is used to simulate the structure, and the impedance tube sound absorption test is carried out to verify it. The experimental and simulation results show high consistency with each other. The results also indicate that the rough neck Helmholtz resonator absorber with roughness introduced in the neck achieves an absorption peak at 58 Hz, with an absorption coefficient of about 0.63. Comparing with the absorber without roughness introduced, the resonant peak frequency becomes low, from 70 Hz to 58 Hz, reducing 17.1%. Therefore, adjusting the neck roughness can serve as a method of tuning the acoustic performance, and the absorption peak frequency can be adjusted by appropriately increasing the neck roughness so as to move it in the low frequency direction. Based on the verification that the roughness of the neck can effectively reduce the absorption peak frequency of Helmholtz resonator, a broadband low-frequency ventilation absorber with a rough neck, which is composed of eight absorption units, is designed. Through simulation calculation and experimental exploration, the absorption coefficient can achieve more than 0.8 in a target working frequency band of 500－1100 Hz. On this basis, the acoustic impedance of the structure can be adjusted by introducing roughness into the neck of Helmholtz resonator, so as to obtain the optimized broadband low-frequency ventilation absorber with a rough neck, which achieves a broadband sound absorption coefficient higher than 0.8 in a frequency range of 400–1200 Hz. The optimized structure also has 8 consecutive absorption peaks with amplitudes above 0.95. The proposed low-frequency broadband ventilation absorber provides a reference for designing and optimizing efficient low-frequency subwavelength acoustic absorbers. It has a wide range of applications in pipeline noise control.

Flow characteristics and noise reduction effects of air cleaners of automobile intake systems with built-in resonators with space efficiency

Optimal design of acoustic performance for automotive air-cleaner

Acoustic metamaterial design for noise reduction in vacuum cleaner

Investigation and Improvement of Air-in Filter Acoustic Performance Towards Pass-by Noise

Virtual Design and Performance Prediction of a Silencing Air Cleaner Used in an I.C. Engine Intake System

Application of Two-Chamber Muffler to Reduce Car Noise in Engine Intake System

Tests of Acoustic Performance of Air-filters and Sound Quality of Intake Noise

Simulation and Optimization of Flow Resistance and Noise Characteristics of Air-cleaner

Acoustic performance of an annular Helmholtz resonator and its application in exhaust system

A Low-Frequency Wideband Ventilation Muffler Based on an Embedded Rough-Necked Helmholtz Resonator

On the reduction of the flow-induced noise using porous material plates with high acoustic transmissibility

Improvement of Acoustic Performance of Air Cleaner

Novel Helmholtz Resonator Used to Focus Acoustic Energy of Thermoacoustic Engine

Transmission Loss Simulation Based on Rectangular-Pulse Method and Experimental Evaluation of Acoustic Performance of Perforated Intake Pipe

Noise reduction and power generation in blower duct using Helmholtz resonator with piezoelectric diaphragm

Low-frequency acoustic attenuator based on a labyrinthine Helmholtz resonator

Acoustic attenuation of side-branched Helmholtz resonator with embedded apertures in grazing flow ducts

Noise attenuation capacity of a Helmholtz resonator

The influence of the grazing flow and sound incidence direction on the acoustic characteristics of double Helmholtz resonators

Calculation of Noise Reduction of an Internal-Combustion Engine Air-Cleaner Based on CFD

Acoustic Performance of A Water Muffler