Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Improvement of Acoustic Performance of Air Cleaner

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

Optimal design of acoustic performance for automotive air-cleaner

Investigation and Improvement of Air-in Filter Acoustic Performance Towards Pass-by Noise

Simulation and Optimization of Flow Resistance and Noise Characteristics of Air-cleaner

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Simulation and Improvement of Silencer at Turbocharger Outlet

Virtual Design and Performance Prediction of a Silencing Air Cleaner Used in an I.C. Engine Intake System

Numerical Simulation and Structure Optimization of Compressor Muffler

Tests of Acoustic Performance of Air-filters and Sound Quality of Intake Noise

Investigation on the influence of working pressure on the performance of the thermoacoustically driven RC load

Calculation of Noise Reduction of an Internal-Combustion Engine Air-Cleaner Based on CFD

Study of NVH performance improvement for a four-cylinder diesel engine body

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

A Study on the Numerical Simulation Method for the Acoustic Performance of Exhaust Catalytic Muffler

Coupled optimization of internal combustion engine radiated noise and interior noise

Thermal and acoustic performance of silencing heat exchanger for engine waste heat recovery

An Improved Boundary Element Method for Predicting Half-Space Scattered Noise Combined with Permeable Boundaries

Indoor air quality and energy-saving potential improvement of a range-hood-integrated air cleaner

Reduce the influence of wind turbine noise by applying acoustical control technology to engine room

Improving sound quality inside vehicle by active noise control method