Optimization of Thermoelectric Performance of Offset-strip Fin Type Exhaust Heat Exchanger
HE Wei,YAO Guangsen,CAI Zihan,SHI Ying,YANG Tianhui,WANG Yulin
DOI: https://doi.org/10.3901/jme.2021.06.184
2021-01-01
Journal of Mechanical Engineering
Abstract:：Due to the poor heat transfer performance of exhaust gas, exhaust heat exchangers with enhanced heat exchange structure are often used in exhaust waste heat thermoelectric conversion systems.Among them, the offset-strip fin type is one of the common types.However, how to balance heat transfer performance and flow resistance to optimize the internal structure and overall size of the heat exchanger, so that the thermoelectric system can obtain the maximum total net output power, is worthy of research.However, the existing results are based on the analysis of the local size and thermoelectric performance of the heat exchanger based on a certain limited size structure, and there is no research on the overall optimized structure and maximum net output power of the enhanced heat exchanger.A thermoelectric conversion numerical model based on automobile exhaust heat recovery is established, combined with field synergy principle, and the influence of the internal fin structure of the offset-strip fin type exhaust heat exchanger on the thermoelectric power is analyzed.In addition, comprehensively by considering the balance of heat transfer performance and flow resistance and taking the maximum net output power of thermoelectric conversion as the optimization goal, the thermoelectric module structure is optimized, and the corresponding optimal performance of the thermoelectric system is obtained.The research results show that the net output power increases significantly with the increase of the fin height, but is less affected by the width of the fin when the size of the thermoelectric module is fixed.However, when the size of the thermoelectric module is optimized, the changes of the fin height and the fin width have great impact on the optimal size of thermoelectric module.The maximum net output power of per unit area decreases significantly with the increase of fin width, but is less affected by fin height.