Abstract:Due to the versatility of its implementation, additive manufacturing has become the enabling technology in the research and development of innovative engineering components. However, many experimental studies have shown inconsistent results and have highlighted multiple defects in the materials’ structure thus bringing the adoption of the additive manufacturing method in practical engineering applications into question, yet limited work has been carried out in the material modelling of such cases. In order to account for the effects of the accumulated defects, a micromechanical analysis based on the representative volume element has been considered, and phase-field modelling has been adopted to model the effects of inter-fiber cracking. The 3D models of representative volume elements were developed in the Abaqus environment based on the fiber dimensions and content acquired using machine learning algorithms, while fulfilling both geometric and material periodicity. Furthermore, the periodic boundary conditions were assumed for each of the representative volume elements in transversal and in-plane shear test cases,. The analysis was conducted by adopting an open-source UMAT subroutine, where the phase-field balance equation was related to the readily available heat transfer equation from Abaqus, avoiding the necessity for a dedicated user-defined element thus enabling the adoption of the standard elements and features available in the Abaqus CAE environment. The model was tested on three representative volume element sizes and the interface properties were calibrated according to the experimentally acquired results for continuous carbon-fiber-reinforced composites subjected to transverse tensile and shear loads. This investigation confirmed the consistency between the experimental results and the numerical solutions acquired using a phase-field fracture approach for the transverse tensile and shear behavior of additively manufactured continuous-fiber-reinforced composites, while showing dependence on the representative volume element type for distinctive load cases.

The numerical model of additive manufactured carbon fiber reinforced polymer under mechanical loading

Numerical Simulation on Mechanical Properties and Damage Behavior of CFRP with Self-Healing Microvascular Channels

Validation of a finite element method for simulation of components produced by continuous carbon fiber reinforced additive manufacturing

Failure mode analysis and prediction model of additively manufactured continuous carbon fiber‐reinforced polylactic acid

Microstructural Analysis of the Transverse and Shear Behavior of Additively Manufactured CFRP Composite RVEs Based on the Phase-Field Fracture Theory

Prediction of Deformation and Failure Behavior of Continuous Fiber Reinforced Composite Fabricated by Additive Manufacturing

Predicting Material Properties of Additively Manufactured Acrylonitrile Butadiene Styrene via a Multiscale Analysis Process

Mixed-mode load bearing estimation of the cracked additively manufactured materials using stress/strain-based models

Characterisation and Mathematical Modelling of Nonlinear Mechanical Behaviour of 3D Printed Short Carbon Fibre Reinforced Composites

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

Numerical modeling for curing of unidirectional carbon fiber reinforced polymer based on micromechanics in Laplace domain

Damage modeling in additive manufacturing processes for metals

Mixed-mode fracture prediction of acrylonitrile butadiene styrene material fabricated via fused deposition modeling

Experimental and Numerical Simulation on Formability and Failure Behavior of Thermoplastic Carbon Fiber/AL Composite Laminates

Additive Manufacturing of Composite Polymers: Thermomechanical FEA and Experimental Study

Three Dimensional Elastic-plastic Finite Element Analysis of Tensile Properties of Carbon Fibre Reinforced Aluminium Alloy Laminates

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Modeling Strategies of Finite Element Simulation of Reinforced Concrete Beams Strengthened with FRP: A Review

Numerical Simulation of Compact-Tension Specimens Repaired by CFRP

A novel systematic approach for robust numerical simulation of carbon fiber-reinforced plastic circular tubes: Utilizing machine-learning techniques for calibration and validation

Numerical Analysis of Laminated Veneer Lumber Beams Strengthened with Various Carbon Composites