Abstract:Epitaxially regrown electrically pumped photonic crystal surface emitting lasers (PCSEL) emitting near 2 and 2.6 µm have been designed, fabricated, and characterized. A high-index-contrast photonic crystal layer was incorporated into the GaSb-based laser heterostructure by air-hole-retaining epitaxial regrowth. A square lattice of triangular holes was etched in the top waveguide core layer of the incomplete laser heterostructure. The nano-patterned surface was subsequently cleaned and regrown with AlGaAsSb p-cladding material. Transmission electron microscopy studies demonstrated uniform regrowth over the nano-patterned GaSb surface. The selected regrowth regimes yielded buried 2D array of the elongated air-holes. The diode PCSELs based on moderately etched nano-patterns demonstrated band edge lasing near 2 µm up to room temperatures. The cascade diode PCSELs operated near 2.6 µm with minimum threshold current densities of about 500 A/cm2 achieved at 180 K. The devices generated mW level output in narrow divergence beam emitted from the window in substrate contact. The angle-resolved electroluminescence measurements revealed four-subband band structure with apparent photonic bandgap corresponding to the buried high-index-contrast square photonic crystal layer. The PCSELs made of heterostructures supporting two modes in the vertical direction demonstrated two sets of subbands showing anti-crossing-like interaction.This article is protected by copyright. All rights reserved.

Short-Pulse High-Power Operation of GaSb-Based Diode Lasers

Continuous-wave, Room Temperature, Low Voltage Green–blue Diode Laser

GaSb-based Narrow Ridge Waveguide Laser Diode with Single Transverse Mode Operation

Room Temperature Continuous Wave Operation of GaSb - Based Semiconductor Disk Laser Near 2 Μm

High power GaSb-based superluminescent diode with cascade cavity suppression waveguide geometry and ultra-low antireflection coating

Monolithically Integrated Iii-Sb Diode Lasers on Si Using Interfacial Misfit Arrays.

1.54 [micro Sign]m GaSb/AlGaSb Multi-Quantum-well Monolithic Laser at 77 K Grown on Miscut Si Substrate Using Interfacial Misfit Arrays

High-Power and Low-Threshold-Current-Density GaAs/AlGaAs Quantum Cascade Lasers

Improve the Performance of 2μm GaSb-based High-Power Lasers by Reducing the Thermal Effect of Series Resistance

Fabrication of High-Power 2μm GaSb-based Laser

High-power, High-Spectral-purity GaSb-based Laterally Coupled Distributed Feedback Lasers with Metal Gratings Emitting at 2 Μ M

Double-Junction Cascaded GaAs-Based Broad-Area Diode Lasers with 132W Continuous Wave Output Power

High power GaSb-based distributed feedback laser with laterally coupled dielectric gratings at 1.95μm

High Efficiency Diode-Pumped Continues-Wave and Passively Q-switched Nd:GSAG Laser with a Two-Dimensional WS2 Saturable Absorber at 1060 Nm

High Spectral Purity GaSb-based Blazed Grating External Cavity Laser with Tunable Single-Mode Operation Around 1940Nm.

GaSb-based Type-I Quantum Well Cascade Diode Lasers Emitting at Nearly 2-Μm Wavelength with Digitally Grown AlGaAsSb Gradient Layers*

Electrically Pumped Epitaxially Regrown GaSb‐Based Type‐I Quantum‐Well Surface‐Emitting Lasers with Buried High‐Index‐Contrast Photonic Crystal Layer

High Performance GaSb Based Digital-Grown InGaSb/AlGaAsSb Mid-Infrared Lasers and Bars

Continuous-wave Mid-Infrared GaSb-based Optically Pumped Semiconductor Disk Laser Operating at 2 Μm

Comparative theoretical and experimental studies of two designs of high-power diode lasers

Performance of a 967 nm CW diode end-pumped Er:GSGG laser at 2.79 Micrometer