Abstract:Adjacent excavations may have adverse impacts on the existing tunnels. Due to the increasing demand for building excavations in close proximity to existing metro tunnels, ensuring the safety and integrity of tunnel structures is a major challenge for city designers and geotechnical engineers. Urban metro tunnels in soft areas of Chinese cities are often constructed using shield tunnelling technology, and the installed precast reinforcement concrete segmental lining are generally connected together by various steel bolts. Due to the presence of joints, the overall tunnel stiffness, including the bending stiffness and shearing stiffness, are significantly reduced. Due to the reduction in shearing stiffness, the tunnel longitudinal deformation can be decomposed into two distinct modes: a bending mode and a shearing dislocation mode. However, current methods for predicting tunnel longitudinal responses to adjacent excavations generally simplify a tunnel as an Euler-Bernoulli beam, which only considers the bending effect and ignores the shearing deformation of jointed tunnels. Moreover, tunnel-ground interactions are commonly considered through the Winkler foundation model, which is unable to account for the interactions of adjacent springs and leads to overestimations of shear forces and bending moments in shield tunnels. In this paper, a new analytical method is proposed that uses a Timoshenko beam to simulate jointed shield tunnel responses when subjected to an adjacent excavation, which can consider both the bending and shearing effects of a shield tunnel. The tunnel-ground interaction is considered by introducing Pasternak two-parameter foundation, which is able to further take account for the interaction between adjacent springs. The tunnel-excavation interaction is analyzed using a two-stage analysis method. First, the excavation-induced unloading stress on the existing tunnel is computed using Mindlin’s solution. Second, the tunnel longitudinal deformation due to the corresponding stress is calculated using finite difference method. The effectiveness of the proposed approach is validated by two well-document case histories, including finite element analysis and field measurement. The predicted results are also compared with those obtained using the traditional methods. Based on the verified analytical solution, a parametric analysis is also conducted to investigate the effects of key factors on the responses of existing tunnels, including excavation-tunnel relative position, ground Young’s modulus and equivalent shearing stiffness.

Key technology of overlapping tunnel construction with earth pressure balance shield method in rheological strata

Effect of nearby undercrossing tunneling on the deformation of existing metro tunnel and construction control

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

Simplified analytical method for evaluating the effects of adjacent excavation on shield tunnel considering the shearing effect

Soil deformation induced by overlapping tunneling in water-bearing strata

RESEARCH ON SOIL DEFORMATION INDUCED BY OVERLAPPED TUNNELING IN STRATUM SOIL

Study on the Influence and Control Methods of Shield Tunneling Through the Sensitive Buildings

Analysis of the Effects on the Adjacent Underground Pipelines by Shield Tunneling Construction

Field Measurement Analysis of the Influence of Double Shield Tunnel Construction on Reinforced Bridge

Investigation on the Influence of Active Underpinning Process on Bridge Substructures During Shield Tunnelling: Numerical Simulation and Field Monitoring

Structural Monitoring of Metro Infrastructure During Shield Tunneling Construction.

Study on Effect of Double-line Parallel Shield Tunneling Side-crossing on Adjacent Frame Structures

Numerical simulation study of overlapping tunnels in soft soil

Experiments and Numerical Simulation of the Reinforcement Effect of Channel-Steel-reinforced Shield Tunnel Segments under Unloading Conditions

Deformation Characteristics of Existing Twin Tunnels Induced by Double Shield Undercrossing with Prereinforcement: A Case Study in Hangzhou

Case study of performance assessment of overlapping shield tunnels with a small curve radius

An in-tunnel grouting protection method for excavating twin tunnels beneath an existing tunnel

Study of the Construction Sequence of Overlapping Tunnels by the Shield Tunneling Method: A Case Study of the Longest Overlapping Tunnel in China

Numerical Study on the Disturbance Effect of Short-Distance Parallel Shield Tunnelling Undercrossing Existing Tunnels

Analysis of the Influence of Pile Underpinning of the Pile Group Under the Viaduct of the Overlapping Shield Tunnel on the Surrounding Environment

Study on the whole process application of advanced grouting pipe shed support under urban complex stratum conditions