Abstract:For reliable and practical application of structural health monitoring approaches in conjunction with dense sensor arrays deployed on 'smart' systems, there is a need to develop and evaluate alternate strategies for efficient problem decomposition to rapidly and accurately determine the occurrence, location and level of small changes in the underlying structural characteristics of a monitored system based on its vibrational signature. Furthermore, there is also a need to quantify the level of uncertainties in the identified system characteristics so as to have a measurable level of confidence in the parameters to be relied on for the detection of genuine changes (damage) in the monitored system. This study presents the results of two time-domain identification techniques applied to a full-scale 17-story building, based on ambient vibration measurements. The Factor building is a steel frame structure located on the UCLA campus. This building was instrumented permanently with a dense array of 72-channel accelerometers, and the acceleration data are being continuously recorded. The first identification method used in this study is the NExT/ERA, which is regarded as a global (or centralized) approach, since it deals with the global dynamic properties of the structure. The second method is a time-domain identification technique for chain-like MDOF systems. Since in this method the identification of each link of the chain is performed independently, it is regarded as a local (or decentralized) identification methodology. For the same reason, this method can be easily adopted for large-scale sensor network architectures in which the centralized approaches are not feasible due to massive storage, power, bandwidth and computational requirements. To have a statistically meaningful results, 50 days of recorded data are considered in this study. The modal parameter and chain identification procedures are performed over time windows of 2 h each and with 50% overlap. Using the NExT/ERA method, 12 dominant modes of the building were identified. It was observed that variations in the frequency estimation are relatively small; the coefficient of variation is about 1–2% for most of the estimated modal frequencies. Chain system identification was successfully implemented using the output-only data acquired from the Factor building. Probability distributions of the estimated coefficients of displacement and velocity terms in the interstory restoring functions (which are the mass-normalized local stiffness and damping values) that were found based on the chain system identification are presented. The variability of the estimated parameters due to temperature fluctuations is investigated. It is shown that there is a strong correlation between the modal frequency variations and the temperature variations in a 24 h period.

Robust prediction metrics for structure-borne noise in timber buildings

Probabilistic assessment of vibration exceedance for a full-scale tall building under typhoon conditions

Train-Induced Vibration and Structure-Borne Noise Measurement and Prediction of Low-Rise Building

Bayesian Forecasting Approach for Structure Response Prediction and Load Effect Separation of a Revolving Auditorium

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Structural dynamic and aerodynamic parameters identification for a tall building with full-scale measurements

A design-oriented method for response prediction of light-weight timber floors under bouncing excitation

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Data for sound pressure level prediction in lightweight constructions caused by structure-borne sound sources and their uncertainties

Influence of Furniture on the Modal Properties of Wooden Floors

Structural and acoustic behavior of a timber slab with wooden tuned mass dampers

Vibration and impact sound properties of hybrid steel-timber floor structures

Practical Back-Analysis Methodology to Predict Underground Train-Induced Building Vibrations

Development of a Prediction Model for Indoor Rolling Noise

The Analysis of Long-Term Frequency and Damping Wandering in Buildings Using the Random Decrement Technique

Two-dimensional acoustic emission source localization on layered engineered wood by machine learning: a case study of laminated veneer lumber plate structure

A novel approach for the structural identification and monitoring of a full-scale 17-story building based on ambient vibration measurements

Comfort assessment of high‐rise timber buildings exposed to wind‐induced vibrations

Prediction for architectural structure-borne sound by the finite-difference time-domain method

Structural Dynamics, Noise and Vibration: Buildings Adjacent to Train Lines

Dynamic parameters of structures extracted from ambient vibration measurements: An aid for the seismic vulnerability assessment of existing buildings in moderate seismic hazard regions