Abstract:Examining crack propagation at the interface of bimaterial components under various conditions is essential for improving the reliability of semiconductor designs. However, the fracture behavior of bimaterial interfaces has been relatively underexplored in the literature, particularly in terms of numerical predictions. Numerical simulations offer vital insights into the evolution of interfacial damage and stress distribution in wafers, showcasing their dependence on material properties. The lack of knowledge about specific interfaces poses a significant obstacle to the development of new products and necessitates active remediation for further progress. The objective of this paper is twofold: firstly, to experimentally investigate the behavior of bimaterial interfaces commonly found in semiconductors under quasi-static loading conditions, and secondly, to determine their respective interfacial cohesive properties using an inverse cohesive zone modeling approach. For this purpose, double cantilever beam specimens were manufactured that allow Mode I static fracture analysis of the interfaces. A compliance-based method was used to obtain the crack size during the tests and the Mode I energy release rate (GIc). Experimental results were utilized to simulate the behavior of different interfaces under specific test conditions in Abaqus. The simulation aimed to extract the interfacial cohesive contact properties of the studied bimaterial interfaces. These properties enable designers to predict the strength of the interfaces, particularly under Mode I loading conditions. To this extent, the cohesive zone modeling (CZM) assisted in defining the behavior of the damage propagation through the bimaterial interfaces. As a result, for the silicon–epoxy molding compound (EMC) interface, the results for maximum strength and GIc are, respectively, 26 MPa and 0.05 N/mm. The second interface tested consisted of polyimide and silicon oxide between the silicon and EMC layers, and the results obtained are 21.5 MPa for the maximum tensile strength and 0.02 N/mm for GIc. This study's findings aid in predicting and mitigating failure modes in the studied chip packaging. The insights offer directions for future research, focusing on enhancing material properties and exploring the impact of manufacturing parameters and temperature conditions on delamination in multilayer semiconductors.

Fracture phenomena induced by Front-End/Back-End interactions: Dedicated failure analysis and numerical developments

Computational Analysis of Mechanical and Electromigration Reliability Problems

Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials

Finite Element Simulation Study of Interfacial Crack Propagation in the Underfilled FC-BGA Package

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Interfacial Delamination Characterization and Thermo-mechanical Reliability of Stacked Die Package by Finite Element Analysis

Microcracking in On-Chip Interconnect Stacks: FEM Simulation and Concept for Fatigue Test

Structural integrity optimization of 3D TSV package by analyzing crack behavior at TSV and BEOL

Fracture analysis on die attach adhesives for stacked packages based on in-situ testing and cohesive zone model.

Numerical Simulation of Interfacial Delamination in Electronic Packaging

Block structured adaptive mesh refinement and strong form elasticity approach to phase field fracture with applications to delamination, crack branching and crack deflection

Failure through crack propagation in components with holes and notches: An experimental assessment of the phase field model

Correlative, ML-based and non-destructive 3D-analysis of intergranular fatigue cracking in SAC305-Bi solder balls

Finite size effects on crack front pinning at heterogeneous planar interfaces: Experimental, finite elements and perturbation approaches

An Extensive Simulation Study of the Interfacial Delamination in Molded Underfill Flip-Chip Packages by Finite Element Method Based on Virtual Crack Closure Technique

Failure analysis from microcracks to a dominant crack in MEMS thin films using combined damage and fracture mechanics

Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach

Three-dimensional Finite Element Analysis of Interfacial Delamination in Molded Underfill Flip-Chip Packages by Virtual Crack Closure Technique

Cohesive Zone Simulation on Dynamic Fracture at the Interfaces of a Single Solder Joint

Mode I Fatigue and Fracture Assessment of Polyimide–Epoxy and Silicon–Epoxy Interfaces in Chip-Package Components

A Discrete Element Model for Damage and Fracture of Geomaterials under Fatigue Loading