Abstract:We have used the TOPAS simulation framework to model the direct conversion of 511 keV gamma rays to electrons in a micro-channel plate (MCP) constructed from thin laminae of a heavy-metal-loaded dielectric such as lead-glass, patterned with micro-channels (LMCP). The laminae serve as the converter of the gamma ray to a primary electron within a depth from a channel-forming surface such that the electron penetrates the channel surface (`surface direct conversion'). The channels are coated with a secondary-emitting material to produce electron multiplication in the channels. The laminae are stacked on edge with the channels running from the top of the resulting `slab' to the bottom; after assembly the slab is metalized top and bottom to form the finished LMCP. The shape of the perimeter of a lamina determines the dimensions of the slab at the lamina location in the slab, allowing non-uniform cross-sections in slab thickness, width, and length. The slab also can be non-planar, allowing curved surfaces in both lateral dimensions. The laminar construction allows incorporating structural elements in the LMCP for modular assembly in large-area arrays. The channels can be patterned on the laminae surfaces with internal shapes and structure, texture, and coatings optimized for specific applications and performance. The channels can be non-uniform across the LMCP and need not be parallel in either transverse direction. Surface direct conversion of the gamma ray to an electron eliminates the common two-step conversion of the gamma ray into an optical photon in a scintillator followed by the conversion of the photon into an electron in a photodetector. The simulations predict an efficiency for conversion of 511 keV gamma rays of $\gtrapprox$ 30\% for a 2.54 cm-thick lead-glass LMCP. The elimination of the photocathode allows assembly at atmospheric pressure.

Transmission Secondary Electron Multiplication for High-Speed Pulse Counting

The construction and characterization of MgO transmission dynodes

Secondary Electron Emission Materials for Transmission Dynodes in Novel Photomultipliers: A Review

Secondary Electron Emission from Multi-layered TiN/Al$_2$O$_3$ Transmission Dynodes

Performance improvement of a discrete dynode electron multiplication system through the optimization of secondary electron emitter and the adoption of double-grid dynode structure

Work at Imperial College on Image Intensifiers with Transmitted Secondary Electron Multiplication

New method for the measurement and simulation on the characteristics of two-dimensional electron multipliers

Sub-Threshold Field Emission from Thin Silicon Membranes

3D Structure of Box-and-grid Electron Multiplier with Higher Electron Collection Efficiency

A Demonstration of Ultra-High Time Resolution with A Pulse-Dilation Photo-Multiplier

Surface Direct Conversion of 511 keV Gamma Rays in Large-Area Laminated Multichannel-Plate Electron Multipliers

Subthreshold Field Emission from Thin Silicon Membranes

High-resolution, high-throughput imaging with a multibeam scanning electron microscope

Electron multiplying CCD technology: The new ICCD

Combination of two Gas Electron Multipliers and a Micromegas as gain elements for a time projection chamber

Enhancement of the Gain and Stability in a Discrete Dynode Electron Multiplier Through Differential Voltage Distribution among Dynodes

Simulation of electron transport in a catoptric photomultiplier tube concept for large rectangular scintillator crystals

A kiloelectron-volt ultrafast electron micro-diffraction apparatus using low emittance semiconductor photocathodes

Development of a Practicable Digital Pulse Read-Out for Dark-Field STEM

High brightness ultrafast Transmission Electron Microscope based on a laser-driven cold-field emission source: principle and applications

The Thick Gas Electron Multiplier and its derivatives: physics, technologies and applications