The construction and characterization of MgO transmission dynodes

H.W. Chan,V. Prodanović,A.M.M.G. Theulings,S. Tao,J. Smedley,C.W. Hagen,P.M. Sarro,H. v.d. Graaf

DOI: https://doi.org/10.1088/1748-0221/18/06/P06028

2024-09-10

Abstract:In this work we demonstrate that ultra-thin (5 and 15 nm) MgO transmission dynodes (tynodes) with sufficient high transmission electron yield (TEY) can be constructed. These tynodes act as electron amplification stages in a novel vacuum electron multiplier: the Timed Photon Counter (TiPC). The ultra-thin membranes with a diameter of 30 {\mu}m are arranged in a square 64-by-64-array. The TEY was determined with a scanning electron microscope (SEM) using primary electrons with primary energies of 0.75 - 5 keV. The method allow us to make a TEY map of the surface while simultaneously imaging the surface. The TEY of individual membranes can be extracted from the TEY map. An averaged maximum TEY of 4.6 +/- 0.2 was achieved by using 1.35 keV primary electrons on a TiN/MgO bi-layer membrane with a layer thickness of 2 and 5 nm, respectively. The TiN/MgO membrane with a layer thickness of 2 and 15 nm, respectively, has a maximum TEY of 3.3 +/- 0.1 (2.35 keV). Furthermore, the effect of the electric field strength on transmission (secondary) electron emission was investigated by placing the emission surface of a tynode in close proximity to a planar collector. By increasing the electric potential between the tynode and the collector, from -50 V to -100 V, the averaged maximum TEY improved from 4.6 +/- 0.2 to 5.0 +/- 0.3 at a primary energy of 1.35 keV with an upper limit of 5.5 on one of the membranes.

Instrumentation and Detectors