Abstract:Supercritical carbon dioxide (sCO 2 ) power cycles are attractive for renewable energy technologies as they exhibit high thermal efficiencies, compact components, and reduced cycle complexity and levelized cost of energy (LCOE) relative to traditional steam power cycles. Consequently, numerous studies have investigated different layouts and operating parameters in search of an optimal cycle configuration. Two cycle layouts provide promising results, namely the partial cooling with reheating (PCRH) cycle, and the recompression with intercooling and reheating (RCICRH) cycle. Both cycles utilise recuperators with high heat transfer rates and literature suggests that the cost for the recuperators may account for a significant portion of the total plant capital expenditure. When modelling the recuperator, most cycle comparative studies employ simplified recuperator models where heat exchanger effectiveness or conductance is utilised to approximate heat transfer. These models do not consider the effect of recuperator size and geometry on heat transfer and pressure drop in detail. In this work, for a concentrated solar power (CSP) application, the performance and component size requirements of the cycles are evaluated parametrically for different cycle mass flow split ratios, pressure ratios, and ratio of pressure ratios across the compressors using detailed discretised one-dimensional (1D) recuperator models. Furthermore, the geometry of these models are optimised (by volume) for straight and zigzag channel printed circuit heat exchangers (PCHEs), widely accepted as the most suitable for this application. Finally, a high-level cost comparison is conducted. The results show that if appropriate pressure drop assumptions are made, a simplified model approach yields valid cycle level results when compared with the results obtained using detailed models which consider practical recuperator geometry. However, the pressures and temperatures within the recuperator may not be predicted to a sufficient level of accuracy. In addition to providing clarity regarding the interplay between key cycle process parameters and cycle performance, straight channel PCHEs provide better thermofluid performance than zigzag channel PCHEs. Furthermore, the RCICRH cycle requires larger turbomachinery and a marginally higher capital outlay for the power cycle, but offers superior thermal efficiencies and requires smaller heat exchangers. For sCO 2 -CSP applications employing dry cooling, this suggests that the RCICRH cycle requires a smaller solar field and cooling system, and may therefore offer increased revenue in adverse weather conditions where direct normal irradiance (DNI) is low and/or ambient temperatures are high. However, the PCRH cycle requires a smaller solar receiver system, a smaller thermal energy storage (TES) system, and smaller turbomachinery, the cost savings of which may outweigh the benefits of the RCICRH cycle.

An Update on the Status of a Reduced Flow Test of a 10mw 700°C sCO2 Integrally Geared Compander

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Efficient turbomachinery layout design and performance comparison of supercritical CO2 cycles for high-temperature concentrated solar power plants under peak-shaving scenarios

Design of a Compact Dry Cooler With an Aluminum Heat Exchanger Core for a Supercritical CO2 Power Cycle Is Evaluated for a Concentrating Solar Power Application

A Potentially Non-Contact Monitor Method for CO2 at the Pseudo-Critical Region Using Infrared Spectrometer

Challenges for Developing and Marketing a Brayton-Cycle Based Power Genset Gas-Turbine Using Supercritical CO2 and a Compressor Design for Simple Recuperated Cycle

Implications of Phase Change on the Aerodynamics of Centrifugal Compressors for Supercritical Carbon Dioxide Applications

Review of Supercritical CO2 Power Cycles Integrated with CSP

Performance of a supercritical carbon dioxide compressor using a streamline curvature based throughflow method

Comparing the partial cooling and recompression cycles for a 50 MWe sCO 2 CSP plant using detailed recuperator models

An Investigation of Condensation Effects in Supercritical Carbon Dioxide Compressors

Numerical research on performance of new structure centrifugal compressor for supercritical CO 2 power systems

Transient Modeling of 10 MW Supercritical CO2 Brayton Power Cycles Using Numerical Propulsion System Simulation (NPSS)

Dynamic Characteristics and Control Strategies of the Supercritical CO2 Brayton Cycle Tailored for the New Generation Concentrating Solar Power

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Mapping the techno-economic potential of next-generation CSP plants running on transcritical CO 2 -based power cycles

Demonstration of a Small‐scale Power Generator Using Supercritical CO2

Transcritical / Supercritical CO2 Recompression Brayton Cycle Using a Novel Rotary Liquid Piston Compressor

Techno–Economic Analysis of the Optimum Configuration for Supercritical Carbon Dioxide Cycles in Concentrating Solar Power Systems

Computational Analysis of the Performance Characteristics of a Supercritical CO2 Centrifugal Compressor

Performance enhancement of a solar-assisted pulverized coal power system by integrating a supercritical CO 2 cycle