Abstract:Radar systems are a type of sensor that detects radio signals reflected from objects located a long distance from transmitters. For covering a longer range and a higher resolution in the operation of a radar, a high-frequency band and an array antenna are measures to take. Given a limited size to the antenna aperture in the front end of the radar, the choice of a millimeter-wave band leads to a denser layout for the array antenna and a higher antenna gain. Millimeter-wave signals tend to become attenuated faster by a larger loss of the covering material like the radome, implying this disadvantage offsets the advantage of high antenna directivity, compared to the C-band and X-band ones. As the radome is essential to the radar system to protect the array antenna from rain and dust, a metamaterial surface in the layer is suggested to meet multiple objectives. Firstly, the proposed electromagnetic structure is the protection layer for the source of radiation. Secondly, the metasurface does not disturb the millimeter-wave signal and makes its way through the cover layer to the air. This electromagnetically transparent surface transforms the phase distribution of the incident wave into the equal phase in the transmitted wave, resulting in an increased antenna gain. This is fabricated and assembled with the array antenna held in a 3D-printed jig with harnessing accessories. It is examined in view of S21 as the transfer coefficient between two ports of the VNA, having the antenna alone and with the metasurface. Additionally, the far-field test comes next to check the validity of the suggested structure and design. The bench test shows around a 7 dB increase in the transfer coefficient, and the anechoic chamber field test gives about a 5 dB improvement in antenna gain for a 24-band GHz array antenna.

STUDY OF RADOME OBSTRUCTIONS ON ANTENNA PERFORMANCE: LIGHTNING STRIPS AND NOSE RADOME EFFECTS

Investigation of the influence of the type of the lightning diverter strip on the spectrum of electromagnetic interference on the antenna under the model of the nose radome of the aircraft by using an artificial thunderstorm cell

Radiation characteristics of rectangular chirostrip antenna

Analysis of A Three-Dimensional Antenna Radiating Through A Two-Dimensional Radome Using A Fast High-Order Method

Study on the Electromagnetic Performance of Radome with Laminar Ablation for Reentry Applications

Analysis of Performance Degradation Introduced by Radome for High-Precision GNSS Antenna

Design and structural analysis of a 70‐m metal space‐frame radome

Rigorous characterization of EMC antennas

Analysis of the Electric Performance of the Missile-borne Helical Antenna and the Radome

Design and simulation of energy selective radome integrated with monopole antenna

Electromagnetic Performance Analysis of Inhomogeneous Radome Walls Considering Temperature and Ablation

Millimeter and Sub-millimeter Wave Transmission Through a Radome Covered by Water: The Impact of the Shape of Water

Sensitivity-Based Electromagnetic Performance Calculation Model for Radome-Covered Array Antennas

Design of an Invisible Radome by Frequency Selective Surfaces Loaded with Lumped Resistors

A Cylindrical Equivalent Source-Based Physical Optics Method for Rapid Analysis of Airborne Radomes

AIM analysis of electromagnetic transmission through dielectric radomes

Variable Thickness Airborne Radome Design Considering Thickness Profile Control and Additional Electromagnetic Performance

Design and Characterization for Dual-Band and Multi-Band A-sandwich Composite Radome Walls

A Metamaterial Surface Avoiding Loss from the Radome for a Millimeter-Wave Signal-Sensing Array Antenna

Nonlinear Metasurface Antenna Radome for Power Protection Application

A New Method to Analyze Broadband Antenna-Radome Interactions in Time-Domain