Abstract:Abstract For disposal of the research reactor of the Technical University Munich FRM II a new transport and storage cask design was under approval assessment by the German authorities on the basis of International Atomic Energy Agency (IAEA) requirements. The cask body is made of ductile cast iron and closed by two bolted lid systems with metal seals. The material of the lids is stainless steel. On each end of the cask the wood-filled impact limiters are installed to reduce impact loads to the cask under drop test conditions. In the cavity of the cask a basket for five spent fuel elements is arranged. This design has been assessed by the Bundesanstalt für Materialforschung und -prüfung (BAM) in view to the mechanical and thermal safety analyses, the activity release approaches, and subjects of quality assurance and surveillance for manufacturing and operation of the package. For the mechanical safety analyses of the package a combination of experimental testing and analytical/numerical calculations were applied. In total, four drop tests were carried out at the BAM large drop test facility. Two tests were carried out as a full IAEA drop test sequence consisting of a 9m drop test onto an unyielding target and a 1m puncture bar drop test. The other two drop tests were performed as single 9m drop tests and completed by additional analyses for considering the effects of an IAEA drop test sequence. The main objectives of the drop tests were the investigation of the integrity of the package and its safety against release of radioactive material as well as the test of the fastening system of the impact limiters. Furthermore, the acceleration and strain signals measured during the tests were used for the verification of finite-element (FE) models applied in the safety analysis of the package design. The FE models include the cask body, the lid system, the inventory and the impact limiters with the fastening system. In this context special attention was paid to the modeling of the encapsulated wood-filled impact limiters. Additional calculations by using the verified numerical model were done to investigate e.g. the brittle fracture of the cask body made of ductile cask iron within the package design approval procedure. The thermal safety assessment was based on analytical energy balance calculations and FE analyses. As an additional point of evaluation in frame of approval procedure, the effect of possible impact limiter burning under accident conditions of transport was considered by the applicant and assessed by BAM. This paper describes the package design assessment from the point of view of the competent authority BAM including the applied assessment strategy, the conducted drop tests and the additional calculations by using numerical and analytical methods.

Thermal Analysis of Drum Type Radioactive Material (RAM) Packaging Arrays in Storage

Thermal Analysis of the 9975 Package Used for Long Term Nuclear Material Storage

Thermal Analysis on NAC-STC Spent Fuel Transport Cask under Different Transport Conditions

Fully Coupled Electrothermal Simulation of Large RRAM Arrays in the “Thermal-House”

Mechanical and Thermal Assessment by BAM of a New Package Design for the Transport of SNF From a German Research Reactor

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Design and Analysis of an Internal Remote Monitoring System for Spent Nuclear Fuel Stored in a Dry Cask

Thermal Tests of Type B Radioactive Transport Package: Experimental Description and Heat Flux Analysis

Some aspects of the use of steel during out of reactor storage and transportation of spent nuclear fuel. (Review)

Mitigation of unintentional radiation from the package lid using PMC packaging

Multilayer Shielding Design for Intermediate Radioactive Waste Storage Drums: A Comparative Study Between FLUKA and QAD-CGA

Neutron Activation of Structural Materials of a Dry Storage System for Spent Nuclear Fuel and Implications for Radioactive Waste Management

ANALYSIS OF HEAT TRANSFER ON SPENT FUEL DRY CASK DURING SHORT-TERM OPERATIONS

Investigation and Design of Energy-Absorbing Structure in Nuclear Fuel Cask

Coupled hydro-thermal flow and radionuclide transport driven by spatial variation of heat-generating radioactive wastes in shale formations

Modeling delayed thermal runaway in nitric acid-soaked cat litter mixed with radioactive waste

Thermal Effects in the Matrix with the Rare Earth Fraction

Design and Testing of an Explosively Loaded Pressure Vessel System for Proton Radiography

RADIATION SAFETY EVALUATION OF A TRANSPORT CONTAINER DURING CARTING SPENT NITRIDE URANIUM-PLUTONIUM FUEL OF BN-600 USING THE MCU-FR CODE

Study on X-ray Induced Two-Dimensional Thermal Shock Waves in Carbon/Phenolic

[Reliability Thermal Design, Simulation and Experimental Verification of Electronic Monitoring Unit for Magnetic Resonance System]