Abstract:This paper reports a study on the mechanical behaviour of tapered concrete-filled double skin steel tubular (CFDST) members under bending. A total of twelve specimens with diverse hollow ratios and shear span ratios were tested. The failure mode, the distribution of the deflection curves, the bending moment-curvature curves (M-φ), the longitudinal stress distribution of the cross-section and the strain were investigated, respectively, to understand the bending performance and working mechanism of the specimens. Meanwhile, the finite element (FE) models of tapered CFDST members were developed to investigate the flexural behaviour by ABAQUS software. Finally, the calculation method for predicting the flexural capacity of tapered CFDST members was proposed. The results show that tapered CFDST specimen fails in a very ductile manner and no tensile fracture is observed at the tension region. The maximum deflection of tapered CFDST members occurs at the 3/4L0 section. Moreover, it is found that the flexural capacity is sensitive to the change of taper angle and hollow ratio due to the variation of flexure stiffness. For instance, ultimate bending capacity can be decreased by 62.6% when the taper angle changes from 0° to 1.71°. In addition, it is not reliable to directly select the minimum section of tapered CFDST members as designed section, which will underestimate the flexural capacity of the specimens. Therefore, the concept of equivalent section is proposed to predict the calculation, and the predicted results are satisfactorily in accordance with the measured results, which can provide certain reference for engineering design.

Investigation of a shape curve function for a special solid coupled optical taper

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

Calculate and analysis curved optical waveguide with FDTD

Analysis of 3D Curve Expansion of Conical Cam with Oscillating Tapered Roller Follower

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Description Of Complex Optical Surface Based On Sparse Radial Basis Function Approximation With Spatially Variable Shape Parameters

FINITE ELEMENT ANALYSIS OF THE DEFORMATION AND STRESS IN THE OPTICAL ELEMENT UNDER COMPLEX OPERATION CONDITIONS

Analysis of Additional Phase Characteristics in Tapered Waveguides

Theoretical and Numerical Analysis for Design of High Ratio Fiber Optic Taper Drawing Process

Simulation Of Aspheric Tolerance With Polynomial Fitting

Bilateral form characterization of curved transparent components using chromatic confocal sensor

Control of Stress Distribution During Large Radius Fiber Optic Taper Drawing Process Based on 2D Simulation

Research on Coupling Distorted Similitude Method of Coupled Cylindrical–conical Shells

Modeling and Analysis of Sub-Aperture Tool Influence Functions for Polishing Curved Surfaces

Simulation On Fused Biconical Tapering Of The Fiber Based On Creep Experiments

Improved model of fused tapered single-mode-fiber coupler

Quantitative Evaluation of Specimen Geometry Effect on Bending Deformation of Laser Peen Forming

Tuning of a Tapered Ridge-Loaded Waveguide Coupler for a Drift Tube Linac of the Compact Pulsed Hadron Source

Mechanical and Optical Analysis of Large-Aperture Optics Mounted on a Frame with a Curved Surface

Research on mechanical behaviour of tapered concrete-filled double skin steel tubular members with large hollow ratio subjected to bending

Theoretical analysis of tapering fused silica optical fibers using a carbon dioxide laser