Abstract:Dyes used in textiles, foods, cosmetics, and chemicals have become a major environmental pollution issue around the world. To address this issue, a number of technologies have been created to remove these pollutants from the environment. Due to their superior properties at nanoscale, numerous nanomaterials have been applied to remove dyes from polluted waters. This research presents the findings of the development of bentonite nano zero-valent iron (B-nZVI) for the treatment of synthetic cationic dyes. This study has three objectives: (i) to produce bentonite nano zero-valence iron (B-nZVI), (ii) to characterize its adsorbents (B-nZVI), (iii) to characterize its adsorption capacity. Four main tests were used for this purpose: (i) a physical test (Brunauer–Emmett–Teller (BET) surface area), (ii) a chemical test (cation exchange capacity (CEC) and X-ray fluorescence (XRF)), (iii) morphology (field emission scanning electron microscopy (FESEM) and (iv) mineralogy (Fourier transform infrared spectroscopy (FTIR). The five factors for the batch equilibrium test are adsorbent dose, concentration, kinetic, pH, and temperature. The batch test showed that the optimum dose for all adsorbents is 0.5 g. For the concentration factor, B-nZVI exhibits larger adsorption capacity (KL = 30,314.0536 L/g; R2 = 1) compared to bentonite (Kd = 0.0219 L/g; R2 = 0.8892). The kinetic factor showed that the adsorption capacity by pseudo-second-order model was the best for both adsorbents (qe = 1.2038 mg/g, R2 = 0.9993 for bentonite and qe = 6.9979 mg/g, R2 = 1 for B-nZVI). For B-nZVI, the interparticle diffusion model (Kf = 0.8645 m2 g−1 min L−1; R2 = 0.9) and intraparticle diffusion model (Kd = 2.3829 m2 g−1 min L−1; R2 = 0.9189) showed a good correlation with the adsorption data, while bentonite showed a lower correlation with the interparticle diffusion model (Kf = 0.0002 m2 g−1 min L−1; R2 = 0.6253) and intraparticle diffusion model (Kd = 0.2886 m2 g−1 min L−1; R2 = 0.6026), respectively. The pH factor showed that the adsorption capacity of bentonite (qe = 0.5674 mg/g) and B-nZVI (qe = 5.3284 mg/g) was highest in acidic conditions (pH 2). As for the temperature factor, there was no significant effect on bentonite and B-nZVI. Therefore, tests can be conducted at room temperature, saving energy. It was also concluded that B-nZVI is the best material for removing MB compared to bentonite and can be considered for the treatment materials of contaminated water.

Green Synthesis of Nano-Zero-Valent Iron Using Ricinus Communis Seeds Extract: Characterization and Application in the Treatment of Methylene Blue-Polluted Water

Green Synthesis of Nanoscale Zero-Valent Iron Aggregates for Catalytic Degradation of Textile Dyes

Synthesis of Nano‐zero‐valent Iron/Chitosan based on Bimetallic Nanoparticles for the Simultaneous Removal of Reactive Violet 5 and Reactive Blue 171 from Aquatic Media: Response Surface Methodology

New Insight into the Mechanism for the Removal of Methylene Blue by Hydrotalcite-Supported Nanoscale Zero-Valent Iron

Zero-valent iron supported-lemon derived biochar for ultra-fast adsorption of methylene blue

Adsorption of Methylene Blue by Bentonite Supported Nano Zero Valent Iron (B-nZVI)

Synthesis, magnetic properties, biotoxicity and potential mechanism of modified nano zero-valent iron for decolorization of dye wastewater

Regression analysis and artificial intelligence for removal of methylene blue from aqueous solutions using nanoscale zero-valent iron

Eco friendly adsorbents for removal of phenol from aqueous solution employing nanoparticle zero-valent iron synthesized from modified green tea bio-waste and supported on silty clay

Green Synthesis of Nano-Zero Valence Iron with Green Tea and It's Implication in Lead Removal

Facile Green Synthesis of Functional Nanoscale Zero-Valent Iron and Studies of Its Activity Toward Ultrasound-Enhanced Decolorization of Cationic Dyes.

Engineered Iron Nanoparticles via Green Routes and Their Applications for Textile Wastewater Treatment

A Novel Green Synthesis of Zinc Sulfide Nano-Adsorbents Using Artemisia Herba Alba Plant Extract for Adsorption and Photocatalysis of Methylene Blue Dye

Removal of Methylene Blue by Granitic Residual Soil Supported Nano Zero Valent Iron (Gr-nZVI): Kinetic and Equilibrium Studies

Green Synthesis of Nanoscale Zero-Valent Iron/Activated Carbon Composites and their Application for Copper and Chromium Removal from Aqueous Solutions

Nanozinc ferrites @ silica as efficient adsorbent for dye removal from wastewater: synthesis and adsorption studies

Nanoscale zero-valent iron for remediation of toxicants and wastewater treatment

Preparation of stabilized nano zero-valent iron particles via a rheological phase reaction method and their use in dye decolourization

Green Synthesis of Nano-Zero-Valent Copper for the D-Blue 60 Textile Dye Removal from Aqueous Medium

Synergetic effect of green synthesized reduced graphene oxide and nano-zero valent iron composite for the removal of doxycycline antibiotic from water

Novel Synthesis of Carbon Spheres Supported Nanoscale Zero-Valent Iron for Removal of Metronidazole