Abstract:Dye waste is one of the most serious types of pollution in natural water bodies, since its presence can be easily detected by the naked eye, and it is not easily biodegradable. In this study, zinc oxide nanoparticles (ZnO-NPs) were generated using a chemical reduction approach involving the zinc nitrate procedure. Fourier transform infrared (FTIR), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and UV-vis techniques were used to analyse the surface of ZnO-NPs. The results indicate the creation of ZnO-NPs with a surface area of 95.83 m2 g−1 and a pore volume of 0.058 cm3 g−1, as well as an average pore size of 1.22 nm. In addition, the ZnO-NPs were used as an adsorbent for the removal of Ismate violet 2R (IV2R) dye from aqueous solutions under various conditions (dye concentration, pH, contact time, temperature, and adsorbent dosage) using a batch adsorption technique. Furthermore, FTIR and SEM examinations performed before and after the adsorption process indicated that the surface functionalisation and shape of the ZnO-NP nanocomposites changed significantly. A batch adsorption analysis was used to examine the extent to which operating parameters, the equilibrium isotherm, adsorption kinetics, and thermodynamics affected the results. The results of the batch technique revealed that the best results were obtained in the treatment with 0.04 g of ZnO-NP nanoparticles at 30 °C and pH 2 with an initial dye concentration of 10 mg L−1, which removed 91.5% and 65.6% of dye from synthetic and textile industry effluents, respectively. Additionally, six adsorption isotherm models were investigated by mathematical modelling and were validated for the adsorption process, and error function equations were applied to the isotherm model results in order to find the best-fit isotherm model. Likewise, the pseudo-second-order kinetic model fit well. A thermodynamic study revealed that IV2R adsorption on ZnO-NPs is a spontaneous, endothermic, and feasible sorption process. Finally, the synthesised nanocomposites prove to be excellent candidates for IV2R removal from water and real wastewater systems.

Green Synthesis of Nano-Zero-Valent Copper for the D-Blue 60 Textile Dye Removal from Aqueous Medium

Green synthesis of zero‐valent copper nanoparticles for removal of D‐yellow 119 textile dye from aqueous medium

Adsorptive removal of Direct Red 31 and Direct Orange 26 azo dyes from aqueous solutions using Ficus nano zero valent copper: Linear, non-linear, response surface methodology (RSM), and artificial neural network (ANN) modeling

Green Synthesis of Nanoscale Zero-Valent Iron Aggregates for Catalytic Degradation of Textile Dyes

Synthesis of Zinc Oxide, Ferric, Cu Nano Particles by Almond Shells, Sugar Cane Bagasse, Eggshells, and Their Application as Catalyst for Dye Reactive Red 195 (RR 195) Removal

Green synthesis of copper oxide nanoparticles using Ziziphus oenoplia extract and its dye degradation properties

Green Synthesis of Silver Nanoparticles Transformed Synthetic Textile Dye into Less Toxic Intermediate Molecules Through LC-MS Analysis and Treated the Actual Wastewater.

Green Synthesis of NiO/ZnO Nanocomposites for the Adsorption of Various Dyes

Synthesis of Nano‐zero‐valent Iron/Chitosan based on Bimetallic Nanoparticles for the Simultaneous Removal of Reactive Violet 5 and Reactive Blue 171 from Aquatic Media: Response Surface Methodology

Use of biogenic copper nanoparticles synthesized from a native Escherichia sp. as photocatalysts for azo dye degradation and treatment of textile effluents.

Zinc Oxide Nanoparticles and Their Application in Adsorption of Toxic Dye from Aqueous Solution

Green Synthesis of Nano-Zero-Valent Iron Using Ricinus Communis Seeds Extract: Characterization and Application in the Treatment of Methylene Blue-Polluted Water

"Synthesis of Zero-Valent Iron Nanoparticles on Polyester Non-Woven Fabric Using Green Chemistry Method for Wastewater Treatment in the Textile Dyeing Industry"

Adsorption studies of Methylene Blue, Coomassie Brilliant Blue, and Congo Red dyes onto CuO/C nanocomposites synthesized via Vitex negundo Linn leaf extract

Adsorption of cationic basic fuchsin dye from aqueous solution using green synthesized zinc oxide coated on reduced graphene oxide nanocomposite (ZnO-rGO NC)

Nano-zinc oxide fibers: Synthesis, characterization, adsorption of acid blue 92 dye, isotherms, thermodynamics and kinetics

Green Synthesis of Zinc Oxide Nanoparticles Using Red Seaweed for the Elimination of Organic Toxic Dye from an Aqueous Solution

Green mediated combustion synthesis of copper zinc oxide using Eryngium planum leaf extract as a natural green fuel: Excellent adsorption capacity towards Congo red dye

Utilization of Eco‐friendly Copper Oxide Nanoparticles and Iron Oxide Nanorods in Dye Removal from Real Textile Industry Effluent

Biogenic synthesis of copper oxide nanoparticles using a cold tolerant bacterium for RB5/DR23 Azo dye adsorption

Adroit effect of copper nanoparticles and copper nanozyme and their effective decolorization of azo dyes