Abstract:Stereolithographic additive manufacturing technology has developed from point-by-point scanning exposure to layer-by-layer masking curing and even volumetric printing. Rapid prototyping is one of the important goals pursued by researchers. A continuous three-dimensional (3D) printing system based on the dual-color photoinitiation and photoinhibition is proposed with the aim of further improving printing speed. The process of continuous 3D printing is realized through the anti-polymerization layer between the cured part and the window generated by the ultraviolet (UV) light sheet (355 nm), and dynamic masking with the blue light (470 nm). The volume of the anti-polymerization layer can be adjusted by the intensity ratio of the incident lights (I-UV,I- 0/I-blue,I-0) and the size of UV laser spot to enhance the reflow filling rate of the liquid resin. For the orthogonal Gaussian anti-polymerization layer, an intensity ratio of 28.6 allows for an inhibition volume of 97.1% of the desired rectangular anti-polymerization zone with a height of 1 mm. The simulation analysis of continuous 3D printing process by flow-structure interaction reveals that the increase of the thickness of the anti-polymerization layer effectively improves the filling rate of the resin and the cross-sectional area of printing, and reduces the stress of the cured part. The experiments with two different 3D structures printing demonstrate that the filling rate and the stress have virtually no effect on the printing process at a large-scale thickness of the anti-polymerization layer, and the printing speed is capable of reaching 200 mu m/s. Certainly, the printing volume and complexity can be further improved with the improvement of the system and the optimization of the resin.

Rapid, continuous projection multi-photon 3D printing enabled by spatiotemporal focusing of femtosecond pulses

High-speed two-photon lithography based on femtosecond laser

High-Throughput Multi-Resolution Three Dimensional Laser Printing

Rapid printing of nanoporous 3D structures by overcoming the proximity effects in projection two-photon lithography

High-Throughput Two-Photon 3D Printing Enabled by Holographic Multi-Foci High-Speed Scanning

An Apparatus for Forming Three-Dimensional Structures by the Method of Two-Photon Femtosecond Polymerization with Simultaneous Spatiotemporal Focusing

Multi-focal multi-photon microscopy for fast parallel direct laser writing

Three-dimensional microfabrication using spatiotemporal shaped femtosecond laser pulses (Conference Presentation)

Rapid Two‐Photon Polymerization of an Arbitrary 3D Microstructure with 3D Focal Field Engineering

Fast Micron-Scale 3D Printing with a Resonant-Scanning Two-Photon Microscope

Rapid two-photon polymerization of arbitrary 3D microstructure with femtosecond laser 3D focal field engineering

Rapid Fabrication of High-Resolution Multi-Scale Microfluidic Devices Based on the Scanning of Patterned Femtosecond Laser.

Ultrafast 3D nanofabrication via digital holography

Additive Manufacturing of Millimeter-Scale Micron-Accuracy 3D Structures

Ultrafast Digital Printing toward 4D Shape Changing Materials.

High-Efficiency High-Resolution Multimaterial Fabrication For Digital Light Processing-Based Three-Dimensional Printing

Light-sheet 3D microprinting via two-colour two-step absorption

Rapid Continuous 3D Printing Via Orthogonal Dual-Color Photoinitiation and Photoinhibition

High-Resolution Femtosecond Laser 3d Micromachining Using Low-Na Focusing Systems

Large volume nanoscale 3D printing: Nano-3DP

Femtosecond Multi-Beam Interference Lithography Based on Dynamic Wavefront Engineering