Abstract:Abstract Turbojet and turbofan engine propulsion system are extensively used in aircraft. Turbojets have simple engine design and extensively used for supersonic flights. Turbofan engine has high mass flow rate and efficient for subsonic application. Variable Cycle Engines, unlike the traditional engines, can vary between high thrust mode for supersonic operations and high efficiency mode for subsonic operations hence are potentially attractive for supersonic transport and advanced tactical fighter aircraft. Variable Cycle Engine can be described as the one that operates with two or more cycles, could serve as a possible solution to reconciling the necessary performance at different operating conditions. The aim of the engine is to combine the best traits of turbojet (high specific thrust) and turbofan (low specific fuel consumption, low noise). Traditional engines have fixed mass flow but VCE can alter the mass flow and function as high bypass engine for the subsonic case and low bypass engine at the supersonic case. Different variable cycle engine design philosophies were studied and the engine architecture used in F120 was incorporated into the base design of a low bypass ratio Turbofan Engine. Cycle analysis of VCE was primarily done based on theoretical calculation and parametric study performed with the use of Gasturb software. Two Variable Area Bypass Injectors (VABI) were used to vary the mass flow through the core and the bypass stream. We aspire to achieve enhanced performance at subsonic and supersonic mission segments. Subsonic, supersonic and take off conditions were decided and the base engine was modified to have multiple operating points. The VCE combines two cycles (subsonic, supersonic) in same engine body and it is crucial for the engine components to deliver the required performance at both the design points. The engine design procedure consists of the matching of components like turbine, compressor, exhaust nozzle and the exhaust mixing area. Systematic study of turbine matching for such engine configuration with multiple operating points was carried out to understand the utility of variable geometry in a VCE. For turbine matching, the mass flow through turbine was held constant by adjusting the VABIs and this was repeated for different takeoff conditions to analyses the output in detail. The non dimensional mass flow through the turbine was fixed for both the design points and hence the turbine could be designed to provide high efficiency. The fuel consumption was found to have decreased compared to the baseline condition which in turn leads to low SFC and higher endurance.

Variable Cycle Optimization for Supersonic Commercial Applications

Parametric Study for Adoption of Variable Cycle Engine Concept for Low Bypass Ratio Turbofan Engine

Variable Cycle Engine Evaluations for Supersonic V/STOL Fighters. Management Summary Report.

Mechanisms and advantages of the variable cycle engine

Conceptual Design and Optimization of Scramjet Engines Using the Exergy Method

Control Optimization of the Transient Performance of the Selective Bleed Variable Cycle Engine During Mode Transition

Integrated Design Of A Variable Cycle Engine And Aircraft Thermal Management System

A Study of Two Variable Cycle Engine Concepts for High Speed Civil Aircraft

Simulation of Optimization of Variable Geometry for a Turbofan Engine of a Missile

Acceleration technique for global optimization of a variable cycle engine

Adaptive Dynamic Modeling and Simulation for Variable Cycle Engine

Study on Integrated Through-Flow Method for Variable Cycle Compression System

Flight trajectory optimization study of a variable-cycle turbine-based combined cycle engine hypersonic vehicle based on airframe/engine integration

A variable cycle jet engine for ASTOVL aircraft

Energy and exergy analyses on the high-pressure bleeding-air variable cycle designed for a wide-speed-range airbreathing propulsion system

Performance Prediction Method for Forward Variable Area Bypass Injector of Variable Cycle Engine Based on Numerical Simulation

Conceptual design and integration of a propulsion system for a supersonic transport aircraft

Multi-dimensional energetic performance modeling of an aircraft engine with the aid of enhanced least–squares estimation based genetic algorithm method

Turbojet Module Sizing for Integration with Turbine-Based Combined Cycle Engine

Numerical optimization of supercharging and combustion on a two-stroke compression ignition aircraft engine

Modeling and Performance Analysis of Variable Cycle Engine with Ceramic Matrix Composite Turbine Blades