Abstract:The smart diesel program requires the engine electronic control unit to consider additional parameters, such as altitude and climatic conditions, in the mapping calibration process. A specially designed environmental simulation cabin, which can simulate environmental conditions at any longitude and dimension, would allow dynamometer testing to be performed indoors. Considering its high cost, a three-dimensional (3D) computational fluid dynamics (CFD) is needed to guide and/or complement experimental researches. As a result, the main objective of this study was to establish a 3D RANS model (i.e., reasonable computational cost and running time) that can provide in-cylinder details and predict the efficiency of a 6V150 diesel engine under varied operating conditions. A sector mesh approach was employed, considering only the compression, combustion, and expansion periods from intake valve closing to exhaust valve opening. The results indicated that the model simulated cylinder pressure agreed well with the experimental data, with relative errors of less than 6% during the primary compression, combustion, and expansion. Further, the model predicted heat release phasing was inconsistent with the experimental results, with absolute errors of less than one crank angle degree for peak pressure location, CA50, and ignition delay. In addition, the multidimensional model captured the effects of environmental pressure and temperature on spray formation (i.e., the dominant phenomenological event). Moreover, the model reasonably reproduced the effects of engine control variables on performance and emissions. All these observations demonstrated the validity of the selection and calibration of geometry, chemistry, and submodels including turbulence, spray, heat transfer, combustion, etc. Overall, the model was deemed capable of predicting combustion characteristics under extreme conditions, including high-temperature, high-cold, and high-altitude environments, which can facilitate the development of smart engines.

Adaptive Dynamic Modeling and Simulation for Variable Cycle Engine

Acceleration technique for global optimization of a variable cycle engine

Mechanisms and advantages of the variable cycle engine

Performance Prediction Method for Forward Variable Area Bypass Injector of Variable Cycle Engine Based on Numerical Simulation

Modeling for Coupled Dynamics of Integrated Hypersonic Airbreathing Vehicle and Engine

An Advanced High Dimensional Model Representation Approach for Internal Combustion Engine Modeling and Optimization

Multidimensional Computational Fluid Dynamics Combustion Process Modeling of a 6V150 Diesel Engine

Variable Cycle Optimization for Supersonic Commercial Applications

Multi-dimensional energetic performance modeling of an aircraft engine with the aid of enhanced least–squares estimation based genetic algorithm method

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine

Research on high fidelity modelling and optimum designing of an adaptive cycle engine's starting process

Recent Development and Prospects of System-Level Modeling of Aircraft Engine

Variable-Geometry Rotating Components Modeling Based on Reference Characteristic Curves for the Variable Cycle Engine

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

A New Integrated Model for Simulating Adaptive Cycle Engine Performance Considering Variations in Tip Clearance

Modeling and Performance Analysis of Variable Cycle Engine with Ceramic Matrix Composite Turbine Blades

An Efficient Multi-Fidelity Simulation Approach for Performance Prediction of Adaptive Cycle Engines

An Integrated Controller Design for a Small Aero-Engine

Thrust online fusion estimation of high-flow dual variable cycle engine

Variable Cycle Engine Evaluations for Supersonic V/STOL Fighters. Management Summary Report.

Adaptive Simulation of Turbofan Engine Component Performance