Effectiveness of ammonium hydroxide precipitate iron and dimethylglyoxime precipitate nickel in ferronickel and limonite soil samples

La Harimu,Afrianti Sumardin Lamuru,Nurlansi,Tisan,La Rudi,Wa Ode Mulyana,Haeruddin

DOI: https://doi.org/10.1063/5.0060295

2021-01-01

Abstract:Research on the separation of ferrous and nickel metals from ferronickel samples has been carried out. This research aims to separate ferrous (Fe) and nickel (Ni) metals from their impurities in ferronickel samples using the Gravimetric method, with NH4OH to precipitate iron (Fe) and dimethylglyoxime to precipitate nickel (Ni). This study ferronickel sample came from PT Aneka Tambang Pomalaa, Kolaka Regency, Southeast Sulawesi, and FeNi type 3 with a nickel content of 27.29% and 68.91% iron. This study used 6.5 M ammonium hydroxide to precipitate iron from the ferronickel soil sample. Also, used 1% dimethylglyoxime to precipitate nickel in limonite soil samples. The optimized parameters were the volume of NH4OH 6.5 M with a variation of 5 mL; 6 mL, 7 mL; 7.5 mL; 9 mL; 10 mL; 12.5 mL; 15 mL; 17.5 mL and 20 mL with a sample volume of 5 mL, while the volume of 1% DMG is 5 mL; 10 mL; 15 mL and 20 mL with a 5 mL ferronickel filtrate volume. The concentrations of ferrous and nickel metals are determined by weighing the precipitate formed. The results showed that the optimum volume of 6.5 M NH4OH to obtain the most Fe2O3 precipitates was 15.0 mL for 5 mL of the ferronickel solution sample with a solution pH of 9.52, while the optimum 1% DMG volume was to produce the highest Ni (C4H8O2N2)2 precipitate, namely 15 mL. The iron yields in ferronickel and limonite soil samples were 99.75% and 95.73%, nickel for ferronickel and limonite soil was 99.61% and 83.63. Finally, it can be concluded that NH4OH and dimethylglioxime could separate iron and nickel from soil samples properly.