Abstract:Excavator interior noise is composed of the engine order narrowband noise and the impulsive broadband noise caused by working device. In situations where only narrowband reference signal can be obtained, the feedforward active noise control (ANC) system can just eliminate the narrowband component, failing to control the broadband noise. Hybrid feedforward and feedback ANC (HANC) systems are useful for such applications where the reference signals can be partially obtained. However, existing HANC systems have the following drawbacks: coupling between subsystems; inaccurate error and reference signals; high computational complexity; performance degradation in response to the impulsive noise. To solve the above problems, this paper proposes a new feedforward and feedback HANC system consisting of 3 subsystems, namely, a delayed feedforward narrowband subsystem, a robust feedback broadband subsystem, and a supporting error calculating (SEC) subsystem. In the proposed HANC system, not only subsystems are decoupled, but also accurate error and reference signals are provided by SEC subsystem. In addition, calculating efficiency is improved by applying the delayed notch least mean square (DLMS) algorithm to the feedforward subsystem, and the system robustness is promoted by adopting the robust algorithm into the feedback subsystem. Numerous computer simulations are performed on the excavator interior noise measured under actual operating conditions. The corresponding results demonstrate the superior performance of the proposed HANC system in terms of the power spectral density of residual error, average noise reduction, robustness of the system, and calculation efficiency to the existing HANC systems. Real-time experiments on excavator interior noise showed that the proposed HANC system was efficient in eliminating broadband and narrowband mixture noise in practice.

Control of Hydraulic System Noise in a Military Vehicle

Control of Noise at the Entrance or Exit of Parking Garages

Experimental Study on Air-Hydraulic Brake System

Investigation of Multi-Degree of Freedom Damped Dynamic Absorber Applied to Wheel Noise Control

Noise Reduction in the Cab of a Special Vehicle

Hybrid Fluid-borne Noise Control in Fluid-filled Pipelines

An Integrated Passive and Active Control System for Reducing Haul Truck Noise

Novel Integrated Control of Fluid Borne Noise in Hydraulic Systems

Novel Integrated Active and Passive Control of Fluid-Borne Noise in Hydraulic Systems

Active Control of Noise in Vehicle Cabins

Active control of fluid-bome noise in hydraulic systems using in-series and by-pass structures

Reinforcement Learning for Active Noise Control in a Hydraulic System

Vibration and Noise Damping Treatment for an Excavator Cab

Simulation and Design Improvement of a Low Noise Control Valve in Autonomous Underwater Vehicles

An active oscillation reduction method for off-highway front loaders

Integrated Solutions for Noise and Vibration Control in Vehicles

Experimental Study on Noise Reduction Effect of a Muffler Inserted in Liquid Transporting Pipeline

Active Noise Control in Workplaces

Acoustic optimization design study of a typical valve-controlled hydraulic system

A new feedforward and feedback hybrid active noise control system for excavator interior noise

A Research on the Noise Source Identification and Noise Control of Heavy-duty Truck