Abstract:Effects of film thickness and electrolyte concentration on the photovoltaic performance of TiO2-based dye-sensitized solar cell (DSSC) were studied. Nanocrystalline anatase TiO2 thin films with varying thicknesses (3.2–18.9μm) have been deposited on FTO/glass substrates by screen printing method as work electrodes for DSSC. The prepared samples were characterized by UV-Vis spectroscopy, Atomic Force Microscopy/Scanning Tunneling Microscopy (AFM/STM) and X-ray diffraction (XRD). The optimal thickness of the TiO2 photoanode is 13.5μm. Short-circuit photocurrent density (Jsc) increases with film thickness due to enlargement of surface area whereas open-circuit voltage decreases with increase in thickness due to increase in electron diffusion length to the electrode. However, the Jsc and Voc of DSSC with a film thickness of 18.9μm (7.5mA/cm2 and 0.687V) are smaller than those of DSSC with a TiO2 film thickness of 13.5μm (9.9mA/cm2 and 0.734V). This is because the increased thickness of TiO2 thin film resulted in the decrease in the transmittance of TiO2 thin films hence reducing the incident light intensity on the N719 dye. Photovoltaic performance also depends greatly on the redox couple concentration in iodide∖triiodide. Jsc decreases as the redox concentration increases as a result of increased viscosity of the solution which lowers ion mobility. Similarly, Voc decreases as the electrolyte concentration increases due to enhanced back electron transfer reaction. An optimum power conversion efficiency of 4.3% was obtained in a DSSC with the TiO2 film thickness of 13.5μm and redox concentration of 0.03mol dm−3 under AM 1.5G illumination at 100mW/cm2.

Solid state dye-sensitized solar cell with TiO2/NiO heterojunction: Effect of particle size and layer thickness on photovoltaic performance

Solid state dye-sensitized solar cell with TiO2/NiO heterojunction: Effect of particle size and layer thickness on photovoltaic performance

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Effect of nickel oxide concentration on titanium oxide bilayer photoanode for dye-sensitized solar cell application

Titanium oxide decorated zinc oxide nanoparticles for dye-sensitized solar cell and heterojunction diode applications

EFFECTS OF TiO2 FILM THICKNESS AND ELECTROLYTE CONCENTRATION ON PHOTOVOLTAIC PERFORMANCE OF DYE-SENSITIZED SOLAR CELL

NiO-decorated Mesoporous TiO2 Flowers for an Improved Photovoltaic Dye Sensitized Solar Cell

Solar-To-Electric Performance Enhancement by Titanium Oxide Nanoparticles Coated with Porous Yttrium Oxide for Dye-Sensitized Solar Cells

Synthesis of Different Sizes TiO2 and Photovoltaic Performance in Dye-Sensitized Solar Cells

Reporting Performance in MoS2–TiO2 Bilayer and Heterojunction Films Based Dye-Sensitized Photovoltaic Devices

High-Efficiency Solid-State Dye-Sensitized Solar Cells Based on Tio2-Coated Zno Nanowire Arrays

TiO 2 Nanofibers Doped With NiS as Photoanode to Improve the Photovoltaic Conversion Efficiency of Dye-Sensitized Solar Cells

Ultrathin SnO2 Scaffolds for TiO2-based Heterojunction Photoanodes in Dye-Sensitized Solar Cells: Oriented Charge Transport and Improved Light Scattering.

Titanium Dioxide/zinc Indium Sulfide Hetero-Junction: an Efficient Photoanode for the Dye-Sensitized Solar Cell

Effect of compressed TiO2 nanoparticle thin film thickness on the performance of dye-sensitized solar cells

Dissymmetric interface design of SnO2/TiO2 side-by-side bi-component nanofibers as photoanodes for dye sensitized solar cells: Facilitated electron transport and enhanced carrier separation

Enhancing the Performance of Nanocrystalline TiO2 Dye-Sensitized Solar Cells with Phenothiazine-Doped Blended Solid Polymer Electrolyte

Enhanced open-circuit voltage of dye-sensitized solar cells using Bi-doped TiO2 nanofibers as working electrode and scattering layer

Impedance analysis of charge transfer upon nickel doping in Tio2-based flexible dye-sensitized solar cell

Effect of TiO2 electrode thickness on photovoltaic properties of dye sensitized solar cell based on randomly oriented Titania nanotubes

A doped heterojunction photoanode: a strategy-driven approach to improve the charge carrier dynamics and photoconversion performance of the TiO2-based dye-sensitized solar cell