Polybutylene succinate (PBS)/acrylonitrile butadiene styrene (ABS) membrane with improved mechanical properties for wastewater treatment

Azadeh Sadeghi,Amirhossien Mottie,Shirin Kiani,Saba Nemati Mahand,Hossein Ali Khonakdar
DOI: https://doi.org/10.1007/s00289-021-03881-w
IF: 2.843
2021-10-05
Polymer Bulletin
Abstract:The low mechanical properties of polybutylene succinate (PBS) limit its applications in the preparation of biodegradable filtration membranes. In this work, acrylonitrile butadiene styrene (ABS) was used to improve the mechanical properties of filtration membranes for the first time. Polybutylene succinate (PBS)/acrylonitrile butadiene styrene (ABS) blends containing 10, 20, and 30 wt% ABS were prepared by dissolving in N-methyl-2-pyrrolidone (NMP), and then membranes were prepared through immersion precipitation. Surface and cross-sectional scanning electron microscopy (SEM), porosity measurement, Fourier transform infrared spectroscopy (FTIR), water contact angle and water content measurements, tensile test, and thermogravimetric analysis (TGA) were conducted to characterize the membranes. Filtration experiments were performed to treat fruit juice production wastewater to determine the rejection of turbidity and chemical oxygen demand (COD). Also, the membrane tendency to fouling was assessed. The results of mechanical properties showed that with increasing the amount of ABS, the mechanical properties of the samples improved so that by increasing the ABS loading to 10, 20, and 30 wt%, the tensile strength increased by 44%, 131%, and 188%, and the elastic modulus increased by 17%, 78%, and 99%, respectively, compared to the mechanical properties of pure PBS. The blend membranes had less tendency to irreversible fouling than the neat PBS membrane regarding the filtration results. The results of wastewater filtration indicate that the COD rejection dropped and steady permeate flux raised with increasing ABS amount. All the membranes rejected 100% of turbidity and thus can be utilized in wastewater pretreatment.
polymer science
What problem does this paper attempt to address?