Abstract:PBS and GNP were mix in solution to produce electrically conductive nanofibers via electrospinning after optimization of the processing conditions. This work presents a method to produce conductive and auxetic composite membranes from a biobased and biodegradable matrix: polybutylene succinate (PBS). The conductivity was improved by the addition of graphene nanoplatelets (GNP) and the samples were produced via solution electrospinning. The membrane properties were shown to increase with increasing GNP concentration and the rotational speed of the collector. In particular, a membrane having 0.2% w/v GNP and fabricated at the highest collector speed (9.96 m/s) showed the highest electrical conductivity (1.56 × 10−4 S/m) while having a negative Poisson's ratio (NPR) of −1.5 in tension. To complete the analysis, mechanical characterizations showed that the presence of GNP led to a substantial increase in Young's modulus (234%) and tensile strength (190%) compared to the neat PBS membrane produced under the same conditions. Differential scanning calorimetry (DSC) revealed a slight crystallinity increase since GNP are acting as heterogeneous nucleating agents, while thermogravimetric analysis (TGA) showed an improved thermal stability for the GNP/PBS membranes. This unique combination of auxetic and conductive properties can be useful for a wide range of innovative applications such as electronic devices, smart textiles, biomaterials, and biomedical devices. Highlights Electrospinning was successful to produce polybutylene succinate (PBS) nanofibers. A careful control of the processing conditions led to auxetic fiber mats. Electrically conductive mats were produced by adding graphene nanoplatelets (GNP) to PBS. The PBS mechanical properties were highly improved (200%) with low GNP content (0.2%).

Improved Mechanical Properties of Poly(butylene Succinate) Membrane by Co-electrospinning with Gelatin

Mechanical and thermal properties of poly(butylene succinate)/plant fiber biodegradable composite

Engineering of hemocompatible and antifouling polyethersulfone membranes by blending with heparin-mimicking microgels

Development of the Silk Fibroin Blend Membranes

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Effect Of Fiber Structure On The Properties Of The Electrospun Hybrid Membranes Composed Of Poly(E-Caprolactone) And Gelatin

Conductive and auxetic composite membranes based on graphene nanoplatelets and polybutylene succinate produced via electrospinning

Interpenetrating Polymer Network Hydrogels Composed of Chitosan and Photocrosslinkable Gelatin with Enhanced Mechanical Properties for Tissue Engineering

Gelatin Enhances the Wet Mechanical Properties of Poly(D,L-Lactic Acid) Membranes

STUDIES ON ONE-STEP ELECTROSPINNING FOR PREPARING CROSSLINKED GELATIN FIBERS

Thrombin‐Loaded Poly(butylene Succinate)‐based Electrospun Membranes for Rapid Hemostatic Application

Preparation and characterization of chitosan/gelatin membrane for preventing postsurgical adhesions

The effect of procyanidine crosslinking on the properties of the electrospun gelatin membranes

Gelatin Blending Improves the Performance of Poly(3-Hydroxybutyrate-co-3-hydroxyhexanoate) Films for Biomedical Application.

Copolymerization with Polyether Segments Improves the Mechanical Properties of Biodegradable Polyesters

Effects of Polybutylene Succinate Content on the Rheological Properties of Polylactic Acid/Polybutylene Succinate Blends and the Characteristics of Their Fibers

Preparation of electrospun nanofibers from solutions of different gelatin types using a benign solvent mixture composed of water/PBS/ethanol

A green and efficient synthetic strategy for the preparation of PBS ionomers with high molecular weight, high ionic group content and good combined properties

Preparation and Characterization of Poly(butylene Succinate-Co-adipate)/poly(lactic Acid) Blends with Enhanced Compatibility, Mechanical Properties, and Heat Resistance

Fabrication and Properties of Poly(butylene Succinate) Biocomposites Reinforced by Waste Silkworm Silk Fabric