Abstract:A multi-particle ion trajectory simulation program ITSIM 6.0 is described, which is capable of ion trajectory simulations for electrode configurations with arbitrary geometries. The electrode structures are input from a 3D drawing program AutoCAD and the electric field is calculated using a 3D field solver COMSOL. The program CreatePot acts as interface between the field solver and ITSIM 6.0. It converts the calculated electric field into a field array file readable by ITSIM 6.0 and ion trajectories are calculated by solving Newton’s equation using Runge-Kutta integration methods. The accuracy of the field calculation is discussed for the ideal quadrupole ion trap in terms of applied mesh density. Electric fields of several different types of devices with 3D geometry are simulated, including ion transport through an ion optical system as a function of pressure. Ion spatial distributions, including the storage of positively charged ions only and simultaneous storage of positively/negatively charged ions in commercial linear ion traps with various geometries, are investigated using different trapping modes. Inelastic collisions and collision induced dissociation modeled using RRKM theory are studied, with emphasis on the fragmentation of n-butylbenzene inside an ideal quadrupole ion trap. The mass spectrum of 1,3-dichlorobenzene is simulated for the rectilinear ion trap device and good agreement is observed between the simulated and the experimental mass spectra. Collisional cooling using helium at different pressures is found to affect mass resolution in the rectilinear ion trap.

Simulation of ion beam extraction and focusing system

Analytical and simulation studies for diode and triode ion beam extraction systems

Three-dimensional modelling of processes in Electron Cyclotron Resonance Ion Source

Numerical Simulation of Beam-Extraction System and Grid Electrostatic Lens for I-4 Linear Accelerator

On Optical Properties Of Ion Beams Extracted From Electron Cyclotron Resonance Ion Source

Space Focusing Simulation for Pulsed Slow Positron Beam by SIMION

3D Particle-in-cell Simulations of Electron Magnetic Confinement in Electron Cyclotron Resonance Ion Sources.

Particle simulation of collision dynamics for ion beam injection into a rarefied gas

Ion Trajectory Simulation for Electrode Configurations with Arbitrary Geometries

Simulations of particle interactions in a high-current RFQ

Three-dimensional simulation of electron extraction process and optimization of magnetic field based on multi-aperture structure of negative hydrogen ion source

Investigation Ion Beam Extraction for Increase Thrust, Efficiency, and Lifetime of RF-ICP Ion Thruster

Simulation of the ion trajectories in the ion detection analysis

Beam optics simulation for the single-ion microbeam facility at Fudan University

Modeling of Beam-Ionized Sources for Plasma Accelerators

Analysis and Particle-in-cell Simulation on the Similarity Relation During an Ion Extraction Process

Level set approach for the simulation of focused ion beam processing on the micro/nano scale

One-dimension Modeling on Parallel-plate Ion Extraction Process Based on Electron-equilibrium Fluid Model

NUMERICAL SIMULATION OF CHARGE EXCHANGE IONS FOR ION THRUSTER

Three-dimensional simulations of ion dynamics in the plasma of an Electron Cyclotron Resonance Ion Source

Optimization and numerical simulation for the accelerator of the commercial H- cyclotron ion source