Abstract:The multi-particle tracking code IMPACT-T is widely used to calculate the particle motion in high intensity linacs. The code is a self-consistent three-dimensional beam dynamics simulation toolbox that utilizes the particle-in-cell method in the time domain. In collaboration between PKU and LBNL, an RFQ module was implemented to the IMPACT-T code, which enables simulations of the accelerator front-end. In order to benchmark the newly developed module in the IMPACT-T code, we have simulated the beam transport in Beijing Isotope Separation On-Line (BISOL) high intensity deuteron driver linac. It consists of a 3 MeV RFQ and 40 MeV superconducting rf linac with four cryomodules. After comparing the simulation results with Parmteqm and TraceWin, we obtained a very good agreement, which represents the validation of the RFQ module in IMPACT-T. INTRODUCTION The IMPACT-T code suite is a time-based parallel tracking program for charged particles in accelerator. It includes three-dimensional space-charge solver based on particlein-cell (PIC) method to efficiently and accurately treat space charge dominated beams [1]. From the simulation point of view, the basic equation we have to solve is shown as Eq. (1). F = qe(E + v × B) (1) The electric and magnetic field strength are a combination of external fields (Eext , Bext) and space charge fields of beam (Esc , Bsc), as shown in the Eq. (2). E = Eext + Esc (2) B = Bext + Bext For the different modules in the IMPACT-T code, the external fields can be described either with analytic formula or with static or RF electromagnetic field maps. The critical and time-consuming part is the space charge effect. In the IMPACT-T, the 3-D Poisson equation is solved by PIC method and Green function. At last, the leap-frog method is used to integrate Eq. (1) to push the particles to get coordinates and velocities at the next time loop, which makes the whole process self-consistent. In collaboration between LBL and PKU, a RFQ module and SRF module have been integrated to the IMPACT-T code. After updating, IMPACT-T is able to do simulation about RFQ and superconducting linac. In order to benchmark the newly developed module in the IMPACT-T code, we have simulated the beam transport in Beijing Isotope Separation On-Line (BISOL) high intensity deuteron driver linac. It consists of a 3 MeV RFQ and 40 MeV superconducting rf linac (SRF linac) with four cryomodules, as shown in Fig. 1. Figure 1: Schematic layout of BISOL deuteron driver linac. RFQ MODULE The popular RFQ design code Parmteqm uses position as an independent variable and has a two-dimensional space charge solver [2]. These approximations might introduce significant errors at lower energy for high intensity proton/ion beams [3]. Consequently, an RFQ module was implemented to the IMPACT-T code. In the RFQ module, the external field Eext can be rebuilt by the corresponding 8-term potential function as shown in Eq. (3). All coefficients can be obtained from the Parmteqm output file PARIOUT.TXT. U(r, θ, z) = V 2 {A01( r

Simulations of particle interactions in a high-current RFQ

SIMULATION OF PARTICLE INTERACTIONS IN A HIGH INTENSITY RADIO-FREQUENCY QUADRUPOLE FOR MOLECULAR HYDROGEN IONS

Study of Simultaneous Acceleration of Positive and Negative Ion Beams by Dynamic Simulation in RFQ

Beam dynamics design and irradiation experiment of beam loss for a CW 100-mA proton RFQ

Particle simulation of collision dynamics for ion beam injection into a rarefied gas

DEVELOPMENT AND BENCHMARKING OF THE IMPACT-T CODE

The Longitudinal “trapping” Phenomenon in the Simultaneous Acceleration of Intense H+ and H− in an RFQ

Beam Simulation Studies of ECR Beam Extraction and Low Energy Beam Transport for FRIB.

Studies of the beam-ion instability and its mitigation with feedback system

Beam Commissioning and Analysis of a Continuous-Wave Window-Type Deuteron Radio-Frequency Quadrupole

New Tasks and New Codes for RFQ Beam Simulation

Transport of intense ion beams in plasmas: collimation and energy-loss reduction

Particle-in-cell Simulation of Transport and Energy Deposition of Intense Proton Beams in Solid-State Materials

Beam Dynamics Simulation and Research of SSC-LINAC Heavy Ion RFQ

Particle-In-Cell Simulation of RFQ in SSC - Linac

Beam loading effects and microwave instability in the booster ring of a high intensity heavy-ion accelerator facility

Simulations of beam-beam and beam-wire interactions in RHIC

BEAM COMMISSIONING AND NEUTRON RADIOGRAPHY ON A HIGH CURRENT DEUTERON RFQ

Design and Cold Model Experiment of a Continuous-Wave Deuteron Radio-Frequency Quadrupole

BEAM DYNAMICS DESIGN AND ERROR STUDY OF THE 5mev RFQ

PROGRAM FOR HIGH-INTENSITY RFQ DESIGN WITH MATCHED AND EQUIPARTITIONED DESIGN STRATEGY