Efficiency enhancement of high-power interleaved DC-DC converter by using an improved phase shedding control with phase equivalent resistance
Guttula Yedukondalu,Susovon Samanta
DOI: https://doi.org/10.1016/j.isatra.2024.03.012
IF: 7.3
2024-03-30
ISA Transactions
Abstract:Highlights • The proposed phase shedding control method has been implemented based on the loss minimization approach. • The loss component of individual phase equivalent resistance has been estimated online in order to improve the phase shedding performance. • The number of phases are activated based on the phase equivalent resistance to improve the converter efficiency profile effectively at entire load conditions. In addition, based on the number of phases activation, the corresponding phase shift adjusted using ACIL-ACMC. • The selected active phases satisfy each phase equal current sharing property during load variation. • Finally, the output voltage should be regulated effectively, during both phase switching and load change. DC-DC converters generally maintain poor efficiency when operating at light to medium loads. This is primarily due to the fact that switching losses outweigh conduction losses significantly, while core losses remain constant regardless of the load conditions. In the case of the interleaved boost converter (IBC), this efficiency deterioration increases more than the conventional boost converter (CBC), when the number of phases increases. Therefore, an efficiency improvement is necessary for IBC under light load to medium load conditions. This paper proposed an enhanced phase-shedding control algorithm using phase equivalent resistance estimation for a 3−φ IBC, aiming to improve efficiency across all load conditions by incorporating automatic phase selection. Also, in the case of phase number selection, the required unknown parameter value i.e. phase equivalent resistance has been measured online in order to improve phase shedding performance. In addition, this algorithm is implemented by including the auto change inner loop-average current mode control (ACIL-ACMC) to maintain equal current sharing among the phases and voltage regulation during load variation as well as phase switching. The overall phase shedding control has been developed in the DSP (TMS320F28335) for the designed 7.5kW IBC.
automation & control systems,instruments & instrumentation,engineering, multidisciplinary