Improved 2 power decoupling in single-phase differential buck inverter for renewable energy applications

DOI: https://doi.org/10.1007/s00202-024-02339-2

IF: 1.63

2024-03-31

Electrical Engineering

Abstract:Single-phase voltage source inverters typically employ a bulky and less reliable aluminum electrolytic capacitor at the DC side to eliminate the second-order (2 ) ripple current from the DC source. Alternatively, attempts have been made to actively eliminate the second-order ripple current by modifying the converter topology and/or realizing the ripple current control loop. Recent reports have attempted to minimize the 2 ripple current by configuring the conventional H-bridge inverter as two differentially connected bidirectional buck converters. This arrangement called a differential buck inverter (DBI) leads to a common-mode current path, which is not present in the conventional H-bridge inverter. The common-mode path is used to eliminate the 2 ripple current. However, the analysis and control design of the ripple current control loop is not explored well in the existing literature. The present work analytically shows that the attempt to eliminate the 2 ripple current introduces additional ripple currents of nearby frequencies. Subsequently, an improved control scheme is developed to mitigate the ripple current from the DC side. Furthermore, the dynamics of the second-order generalized integrator, used to estimate ripple current from the DC side current, is included in the control design process, leading to a more stable and robust closed-loop system. All the analytical inferences and the efficacy of the proposed control are validated experimentally using a laboratory-developed 110 V, 50 Hz, 800 W DBI prototype.

engineering, electrical & electronic