Abstract:Single phase rectifiers and inverters are inherently subject to double-line frequency ripple power, at both the ac and dc sides, which has adverse effects on the overall system performance. Normally a bulky capacitor is placed at the dc side of the circuit to prevent this ripple power ripple from reaching the dc source. This approach results in low power density and reliability issues. As a result, active power decoupling methods have been proposed such that the total capacitance required can be orders of magnitude smaller. This paper proposed a new power decoupling circuit, which is composed of two separate buck converters operating in each half cycle and two split dc-link capacitors. The dc link capacitors can be used to store ripple power while supporting transient power to the main output. The capacitance needed is reduced largely by allowing high voltage fluctuation on capacitors, while the dc link voltage can be controlled with small fluctuation. The dc link capacitors can be fully charged and discharged with full energy utilization. The added power decoupling module does not need dead time, and totally eliminates the shoot through concerns, which could enhance the system reliability. Another advantage of the proposed power decoupling method is that its control is independent with that of the main power stage. Modulation and control strategy are proposed for the power decoupling circuit. The operating principles together with parameters design are discussed in detail. Both simulation and experimental results prove the effectiveness of this method.

A Multiplexing Modulation Strategy Based On Single-Phase Ac/Dc Converter With Optimized E-Capless Function

Multifunction Control Strategy for Single-Phase AC/DC Power Conversion Systems with Voltage-Sensorless Power-Decoupling Function

Control and Modulation of a Single-Phase AC/DC Converter with Smooth Bidirectional Mode Switching and Symmetrical Decoupling Voltage Compensation

An Improved Power-Decoupling Scheme with Grid Inductor Phase-Shift Modification for Single-Phase Converter

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

Active Power Decoupling for a Modified Modular Multilevel Converter to Decrease Submodule Capacitor Voltage Ripples and Power Losses

A High-Efficiency 12/1-V Dual-Path Series-Capacitor Converter with Low $v\cdot A$ Metric and Full Duty Range

Efficient Model-Free Predictive Power Control for Active Front-End Modular Multilevel Converter

Minimum Switching Losses Discontinuous PWM Strategy for Bidirectional Single-Phase AC–DC Converter With Active Power Decoupling Circuit

Carrier-Based Generalized Discontinuous PWM Strategy for Single-Phase Three-Legs Active Power Decoupling Converters

Three Phase PFC Converter with Multilevel Inductive Switching Network

PFC converter with novel integration of both EMI filter and Boost inductors

High efficiency PFC with Enabling Window Control and active input bridge

A High Power Density 3-Phase/1-phase Compatible MISN-PFC Converter for On-Board Charger

A Modular Multilevel Converter with Active Power Filter for Submodule Capacitor Voltage Ripples and Power Losses Reduction

Natural Power Factor Correction and Soft Switching Design for a Single-Stage Bidirectional Dual Active Bridge AC–DC Converter

Single-Stage Isolated Electrolytic Capacitor-Less EV Onboard Charger With Power Decoupling

Dual Buck Based Power Decoupling Circuit for Single Phase Inverter/rectifier

Simple-Structure Active Lossless Decoupling Rectifier With Automatic PFC

Efficiency improvement of a DC/AC converter with the power decoupling capability

Decoupling Control of an LLC-Quad-active-bridge Cascaded Power Electronic Transformer based on Accurate Small-signal Modeling