Abstract:Timely detection of the occurrence of cavitation in pumps is very important as it can cause pitting, erosion, and loss of pump performance. Attempts to determine a unique signature of cavitation using vibration, acoustic emission [1] [2], audibleacoustics [3], and higher order non-linear modeling [4] techniques have been elusive. This paper presents the results of an experimental study undertaken first to understand the structure of cavitation and develop an effective means for on-line detection of it. Tests were performed to measure vibration, pressure, audible sound, motor current and the force due to cavitation of a centrifugal pump. A special force transducer capable of measuring fluctuating forces exerted by cavitation process on the pump casing was developed to understand the dynamics of cavitation phenomenon and signatures of a centrifugal pump operating under different cavitation conditions. Two of the abnormal operating conditions studied were the formation of tiny air bubbles (initiation of cavitation) and then fully developed cavitation. Experiments were also run with a transparent LEXAN cover using colored water to observe the cavitation. A Video was also taken for observing and developing an understanding of cavitation mechanism. Vibration, force, audible sound, and dynamic pressure were analyzed to detect cavitation. It was found that the pump has higher vibration amplitude in the axial direction than in the radial direction. This may be due to lower stiffness in the axial direction. From the experiments, it was also determined that significant amount of air bubbles will increase vibration component associated with the impeller vane pass frequency. Cavitation seems to excite high frequency structural resonances. Also, a fully developed cavitation may reduce the impeller vane pass frequency vibration amplitude. The force spectra did not provide any measurable information of cavitation.

Using Vibration Signatures Analysis to Detect Cavitation in Centrifugal Pumps

An intelligent detecting approach of incipient cavitation based on fast kurtogram

Analyses of the spatial and temporal features of the blade pressure‐side cavitation in a pump‐turbine runner in the pump mode

Numerical Simulation of Cavitating Flow in Water Hydraulic Axial Piston Pump

Cyclostationary Approach to Detect Flow-Induced Effects on Vibration Signals from Centrifugal Pumps

Cavitation diagnosis method of centrifugal pump based on characteristic frequency and kurtosis

An Adaptive Autogram Approach Based on a CFAR Detector for Incipient Cavitation Detection.

Experimental and Numerical Investigations of the Noise Induced by Cavitation in a Centrifugal Pump

Cavitation Characterization of Fluid Machinery Based on Cyclostationary Analysis: Part 2-Cavity Development Evaluation by Modulation Intensity

Detection of Cavitation in a Centrifugal Pump-as-Turbine Using Time-Domain-Based Analysis of Vibration Signals

Analysis of Cavitation-induced Vibration Characteristics of a Vortex Pump Based on Adaptive Optimal Kernel Time-frequency Representation

Experiment study of cavitation induced vibration and noise of guide vane mixed flow pump

Wavelet-based Multiresolution Analysis of Cavitation-Induced Loading Instabilities under Phase Effect in a Waterjet Pump

Study of the Cavitation Phenomenon Inside Roller Vane Pump

Assessment of cavitation noise in a centrifugal pump using acoustic finite element method and spherical cavity radiation theory

Off-Design Operation and Cavitation Detection in Centrifugal Pumps Using Vibration and Motor Stator Current Analyses

Analysis of Cavitation Behaviour in A Centrifugal Pump

Numerical study on cavitation flow and induced pressure fluctuation characteristics of centrifugal pump

Cavitation Characterization of Fluid Machinery Based on Cyclostationary Analysis: Part 1—Cavity Type Identification by Carrier Distribution

A Review of Pump Cavitation Fault Detection Methods Based on Different Signals

Quantitative Analysis of Energy Loss and Vibration Performance in a Circulating Axial Pump