Abstract:The hysteresis of rubber materials due to deformation and viscoelasticity is the main reason for the heat build-up (HBU) and rolling resistance (RR) of the rolling tire. It is important to realize the high precision prediction of HBU and RR of tire for the optimal design of high-performance fuel-saving tire. In this work, a thermo-mechanical coupling method based on Endurica and Abaqus co-simulation was used to predict the steady-state temperature distribution and RR of three finite element models (Lagrangian–Eulerian model, Lagrangian model, and Plane Strain model) of the solid tires under different loads and rotating speeds. The simulation results were compared with the experimental results. The Kraus self-heating model was utilized in the thermo-mechanical coupling method, which realized the quantitative relationship between the dynamic loss modulus of rubber and the loading conditions (temperature, strain, and strain rate). Special attention was paid to the determination of the material parameters in the Kraus self-heating model. The comparison between simulation results and experimental results shows that the Lagrangian model had the highest prediction accuracy, and the average prediction errors of the steady-state surface temperature and RR under three loading conditions were 3.4% and 7.9%, respectively. The Lagrangian–Eulerian model came in the second with average errors of 9.7% and 11.1%, respectively. The Plane Strain model had the worst prediction accuracy, with the average errors of 21.4% and 44.6%, respectively. In terms of the simulation time, the Plane Strain model had the lowest cost, and the average calculation time was 1143 s. The Lagrangian–Eulerian model took the second place, with an average calculation time of 2621 s. The Lagrangian model had the highest computation cost, with an average time of 5597 s. The comparison between the simulation results and the experimental results verified the effectiveness of the thermo-mechanical coupling analysis method. The methods of three finite element models of the solid tires in this work can provide some reference for the optimization design of elastomeric components (Lagrangian model), pneumatic tires (Lagrangian–Eulerian model), and non-pneumatic tires (Plane Strain model).

Ultrasonic Viscoelasticity Evaluation Method for Tribology of Rubber Material

Thermo-mechanical coupling analysis of transient temperature and rolling resistance for solid rubber tire: Numerical simulation and experimental verification

Research on simplified tire finite element modeling and simulation method

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

In situ evaluation of contact stiffness in a slip interface with different roughness conditions using ultrasound reflectometry

Rubber Comprehensive Constitutive Equation and the Prediction of Tire Temperature and Rolling Resistance

Mechanical properties of cord-rubber composites and tire finite element analysis

High-speed Tribology Behaviors of Aircraft Tire Tread Rubber in Contact with Pavement

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Analysis of the Scenarios of Use of an Innovative Technology for the Fast and Nondestructive Characterization of Viscoelastic Materials in the Tires Field

Temperature Measurements at Tyre Tread Rubber on Sandpaper Oscillatory Sliding Contacts Using Acicular Grindable Thermocouples

An innovative tensile test method to evaluate the effect of the loading rate on viscoelastic interfaces

The Frictional Vibration Attenuation of Rubber Utilizing a Groove on the Body

A detailed tire tread friction model considering dynamic friction states

A Contribution to Non-Contact Skid Resistance Measurement

Heat Build-Up and Rolling Resistance Analysis of a Solid Tire: Experimental Observation and Numerical Simulation with Thermo-Mechanical Coupling Method

A new method for selecting and evaluating the hyperelastic model of tread rubber material under rolling contact condition

Regional morphological difference and evolution of tread rubber and its formation mechanism under high-speed sliding friction

Hyper-Pseudo-Viscoelastic Model and Parameter Identification for Describing Tensile Recovery Stress–Strain Responses of Rubber Components in TBR

Tunable Van der Waals interfacial interaction for ultrahigh-damping rubber bends

Contactless Skid Resistance