Abstract:Water addition to aviation kerosene draws increasing attention in increasing heat sink and suppressing coke formation for regenerative cooling of scramjet engines. However, the effect of water on flow, reaction and heat transfer, particularly the thermal inhomogeneity in curved cooling channel is rarely reported. In the present study, the effect of water on coking and heat transfer inhomogeneity characteristics of China aviation kerosene, RP-3 studied in a uniformly heated curved mini-channel. A transient three-dimensional numerical simulation model with hybrid pyrolysis and steam reforming reactions of RP-3 is established and validated. The results show that there exists serious mass and thermal stratification in the curved mini-channel due to secondary flow and species diffusion. Specifically, RP-3 and water are diffused to concentrate at the bottom heating wall surface while coke deposition and light gaseous species, e.g., H 2 , CH 4 , CO are concentrated at the top heating wall surface. The thermal difference between the top and bottom heating walls is significant. Temperature and coke content of the top heating wall are much higher than those of the bottom heating wall. The gas film and coke deposition formed at the top heating wall surface lead to serious heat transfer deterioration. Therefore, the heat transfer coefficient at the bottom wall of the curved channel is much higher than that of the top wall. Water addition enhances secondary flow and thus exacerbates the coking and heat transfer inhomogeneity in the curved cooling channel. With water content increasing from 0 to 15 wt%, the secondary flow velocity increases by 288.2%, the conversion of RP-3 increases by 114.8% and the average coke content on the heating walls decreases by 40%. Meanwhile, the average heat transfer coefficient increases by 33.9% at the bottom heating wall but decreases by 18.0% at the top heating wall with the increase of water content.

Coking Test Using Jet A-1 and Desulfurized Kerosene in a Regenerative Cooling Channel Environment

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Conjugate Heat Transfer, Endothermic Fuel Pyrolysis and Surface Coking of Aviation Kerosene in Ribbed Tube at Supercritical Pressure

Heat Transfer and Cracking Performance of Endothermic Hydrocarbon Fuel when It Cools a High Temperature Channel

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Experimental Study of Influence of Inlet Temperature on Aviation Kerosene Coking Characteristics

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Transient simulation of conjugate heat transfer of kerosene with thermal oxidative and surface coking reactions at a supercritical pressure

Morphological and Compositional Analysis on Thermal Deposition of Supercritical Aviation Kerosene in Micro Channels

The effect of water on coking and heat transfer inhomogeneity of supercritical aviation kerosene in a curved mini-channel

Kinetic Modeling of Thermal Oxidation and Coking Deposition in Aviation Fuel

Supercritical-Pressure Heat Transfer, Pyrolytic Reactions, and Surface Coking of N-Decane in Helical Tubes

Review and Experimental Study of the Coke Deposition and Heat Transfer Characteristics of Aviation Kerosene at Supercritical Pressure

Oxidative and pyrolytic coking characteristics of supercritical-pressure n-decane and its influence mechanism on heat transfer

Experimental and Numerical Study on Oxidation Deposition Properties of Aviation Kerosene

Flow and Heat Transfer in a Mini Cooling Channel with Artificial Roughness

The Influence of Thrust Chamber Structure Parameters on Regenerative Cooling Effect with Hydrogen Peroxide as Coolant in Liquid Rocket Engines

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel