Abstract:AgNO3 colorimetric measurement of chloride in cement-based materials can be implemented owing to chemical reactions between Ag+ and Cl− or OH− ions, which result in the precipitation of AgCl and Ag2O. When the mass ratio of AgCl to precipitated AgCl+Ag2O reaches a critical value (Pcrit-AgCl), a color change boundary appears. In this paper, chloride concentrations required for the formation of the critical mass ratio of AgCl to precipitated AgCl+Ag2O derived from the AgNO3–NaCl–NaOH system were calculated based on the solubility products of silver hydroxide and silver chloride, and mass conservation of the chemical reactions. Pcrit-AgCl was determined as 0.65 through a series of AgNO3 colorimetric measurements on cement-based materials. Calculated results indicated that if Ag+ could react with all OH− and Cl−, there existed a linear relationship between the critical chloride concentration for color change (Ccrit-Cl–) and OH− concentration (COH–), namely Ccrit-Cl–=1.6COH–. If Ag+ could react with only partial OH− and Cl−, there existed an exponential relationship among Ccrit-Cl– and COH–, Ag+ concentration (CAg+), volume of AgNO3 solution (VAg+) as well as the volume of NaCl+NaOH solution (VOH–+Cl–), namely Ccrit-Cl–=0.00695COH–+0.608CAg+VAg+/VOH–+Cl–. It can be concluded that the alkalinity of cement-based materials, concentration and volume of sprayed AgNO3 solution and volume of pore solution have effects on chloride concentration at the color change boundary (Cd). Calculated Cd values ranged between 0.03 and 0.96mol/L (in pore solution) or 0.011% to 2.27% (by the mass of binder), respectively. This explains why reported range of chloride concentration at the color change boundary in publications varied in a broad range.

Calculation of chloride concentration at color change boundary of AgNO3 colorimetric measurement

EFFECT OF CONCRETE ALKALINITY ON CHLORIDE ION CONCENTRATION AT THE COLOUR CHANGE BOUNDARY DURING AGNO(3) COLORIMETRIC MEASUREMENT

Factors affecting AgNO 3 colorimetric method for measurement of chloride migration in cement-based materials

Agno3-Based Colorimetric Methods for Measurement of Chloride Penetration in Concrete

AgNO_3 COLORIMETRIC METHOD USED FOR MEASURING CHLORIDE MIGRATION IN CONCRCRETE

Error Analysis for Measurement of Non-Steady State Chloride Migration Coefficient in Concrete Using AgNO_3 Colorimetric Method

Effect of hydroxyl ions on chloride penetration depth measurement using the colorimetric method

Developing a Novel Expression for Chloride Ion Concentration Threshold in Reinforced Concrete: Integration of Electrochemical Analysis and Time-Dependent Modeling

Chloride Profile Characterization by Electron Probe Microanalysis, Powder Extraction and AgNO3 Colorimetric: A Comparative Study

Application of Silver Nitrate Colorimetric Method to Non-Steady-state Diffusion Test

Chloride Ion Concentration on the Surface of Cement-Based Materials in Chloride Solutions

A Numerical Method for the Chloride Diffusivity in Concrete with Aggregate Shape Effect

PRECIPITATION OF CHLORIDE ION IN CONCRETE UNDER NATURAL DIFFUSION CONDITION

The Competitive Diffusion Process of Chloride into Mortar Immersed in Chloride-Sulfate Solution

Statistic Investigation on Chloride Ions Distribution Based on Numerical Reconstruction of in Situ Meso-Structure of Concrete

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Preparation of Chloride Ion Selective Electrode and Its Potential Response to Different Chloride Solutions Representing Concrete Environments

Effects of concentration of chloride anion on the morphology and microstructure of precipitates from lead nitrate solutions

Monitoring chloride ion penetration in concrete with different mineral admixtures based on embedded chloride ion selective electrodes

Investigation on Characteristic Parameters of Chloride Resistance of Concrete