Abstract:While Portland cement produces large amounts of carbon dioxide, low-calcium high-strength cements effectively reduce carbon emissions by decreasing the proportion of high-calcium minerals. In order to enhance the practical application value of low-calcium high-strength cement, the effects of mineral admixtures on the chloride binding capacity and pore structure characteristics of low-calcium high-strength cement pastes were investigated by equilibrium method and mercury intrusion method. The results showed that the chloride binding capacity of low-calcium high-strength cement pastes is superior to that of Portland cement. Fly ash and slag enhance this capacity by promoting monosulfoaluminate and C-S-H gel formation, with fly ash being more effective. Ground limestone also boosts chloride binding when incorporated at less than 10 wt%. However, sulfates have a more significant negative impact on chloride binding capacity in low-calcium high-strength cement pastes compared to Portland cement. The porosity of low-calcium high-strength cement pastes exhibits contrasting trends with the addition of fly ash, ground limestone, and slag. Fly ash and limestone initially coarsen the pore structure but later facilitate the transition of larger pores to smaller ones. In contrast, slag initially has little impact but later promotes the conversion of large capillary pores to medium ones, optimizing the pore structure. Notably, above 10 wt% fly ash, the critical pore diameter decreases with additional fly ash except at 10% where it increases for 3 days. Ground limestone enlarges the critical pore diameter, and this effect intensifies with higher content. During early hydration, slag decreases the critical pore diameter, but its impact diminishes in later stages.

Test methods and its applicability of chloride binding capacity in cementitious materials

Comparative Study On Testing Methods Of Chloride Ions Diffusion Coefficient In Concrete

Chloride Resistance and Binding Capacity of Cementitious Materials Containing High Volumes of Fly Ash and Slag

A study of chloride binding capacity of concrete containing supplementary cementitious materials

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Comparison and Analysis of Chloride Binding Isotherm in Existing Concrete Structure

Experiments on Chloride Binding and Its Release by Sulfates in Cementitious Materials

Evaluation on effect of carbonation on chloride binding capacity and stability of cement hydration products with multiple testing methods

Prediction of Chloride Binding Isotherms for Blended Cements

Chloride Permeability in Cement-Based Materials Based on DC/AC Methods

An experimental study of chloride diffusivity of cement paste mixed with fly ash and slag

Effect of calcium leaching on the characteristics of chloride physical adsorption and chemical binding of cement-based materials

Influence of the coupled effect of stray current and sulfate upon chloride diffusing into concrete of underground structures

Experimental study on the capillary absorption of cement-based materials and analysis of influencing factors

Experimental Study of Binding Capability of Chloride Ion under Stray Current in Cement Hardened Paste Admixed with Fly Ash

Chloride Binding Behavior and Pore Structure Characteristics of Low-Calcium High-Strength Cement Pastes

Study on the chloride ion binding rate of sulfoaluminate cement mortars containing different mineral admixtures

Experimental Research of Chloride Diffusion Coefficient in Concrete

Influence of delay period on chloride ions binding capacity of cement-based materials

Chloride penetration and binding behavior in unsaturated alkali-activated slag mortars

Chloride Binding Capacity and Its Effect on the Microstructure of Mortar Made with Marine Sand