Abstract:More than one million tons of secondary aluminum dross as a hazardous waste are produced by aluminum manufacturers per year throughout the world, which imposes high disposal costs and serious environmental problems. As secondary aluminum dross is considered as an alumina-rich inorganic waste, this study aims to propose a promising approach for clean production of activated-alumina as a widely-used adsorbent, catalyst and catalyst support. In this paper, synthesis and characterization of high crystalline activated-alumina nanopowder from secondary aluminum dross using a novel five-step leaching-based process are presented. To optimize the process, various parameters of dross particle size, leaching time, leaching temperature, acid concentration, and liquid-to-solid ratio were studied using One-Factor-At-a Time approach (OFAT). For the following optimum leaching conditions: particle sizes between 38 and 75 μm, leaching time of 120 min, leaching temperature of 85 °C, acid concentration of 5 M, and the liquid-to-solid ratio of 20 ml/g, the extraction efficiency of alumina was around 83%. The leach liquor was purified by adding 2 N NaOH resulting in sodium aluminate-rich solution. The purified liquor was treated by adding HCl to precipitate Al(OH)3, and the Al(OH)3 was then washed and calcined at 700 °C for 2 h to obtain alumina. Chemical composition, mineralogical phases, chemical bonds, morphology, and particle size distribution of the as-synthesized activated-alumina were determined using X-ray fluorescence (XRF), X-ray diffractometry (XRD), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), and dynamic light scattering (DLS), respectively. The as-synthesized activated-alumina exhibited 97.61% purity. Its XRD pattern showed mainly characteristic peaks of gamma phase of alumina. Morphological study by FESEM revealed that the as-synthesized alumina particles have rounded-corner shape. The crystal and average particle size values were about 18.47 and 513 nm, respectively.

Physico-chemical characterization and thermal analysis data of alumina waste from Bayer process

Surface and Bulk Properties of Alumina Recovered Under Various Conditions from Aluminum Dross Tailings Chemical Waste Versus Bauxite Ore

Perspectives for the application of bauxite wastes in the development of alternative building materials

Microstructural, physical and mechanical behavior of pastes containing clays and alumina waste

Industrial Wastes for Production of Thermally Stable and Corrosion Resistant alumino-silicate Refractory Ceramic Bodies

Low-Calcination Temperature to Synthesize A-Alumina From Aluminium Waste Can Using Sol-Gel Method

Gas Processing Waste: Promising Raw Material for Designing the Composition of Ceramic Grinding Bodies

A promising green process for synthesis of high purity activated-alumina nanopowder from secondary aluminum dross

X-Ray Powder Diffraction and Mössbauer Study of Red Mud Residue from Alumina Production

Analysis and prospect of thermodynamic behavior of aluminosilicate solid waste during ceramization

The Utilization of Bauxite Residue with a Calcite-Rich Bauxite Ore in the Pedersen Process for Iron and Alumina Extraction

Enhanced alumina recovery from secondary aluminum dross for high purity nanostructured γ-alumina powder production: Kinetic study

A hazardous waste from secondary aluminium metallurgy as a new raw material for calcium aluminate glasses

Thermal pre-treatment of reactive aluminium alloy waste powders

Extraction and Utilization of Valuable Elements from Bauxite and Bauxite Residue: A Review

Study on Preparation Technology and Heat Conduction Mechanism of High-Purity & Ultra-Fine Alumina Powder from Scrap Aluminum Cans

Exergoeconomic and Exergoenvironmental Analyses of a Promising Alumina Extraction Process from Secondary Aluminum Dross in China

Tribological Behavior of Friction Materials Containing Aluminum Anodizing Waste Obtained by Different Industrial Drying Processes

Fabrication of Nano-Layer-structure Alumina Powders from an Alumina Concentrate Through an Intensified Bayer Process