Abstract:In recent years, most of the dedication to waste recycling and upcycling has been focused on plastic polymers. There is less development in utilizing discarded iron or aluminum cans for upcycling. In this study, we aim to prepare anodic aluminum oxide membranes from the top of discarded aluminum cans (T-AAO) and from the side of discarded aluminum cans (S-AAO) and demonstrate their application values. The T-AAO and S-AAO membranes are obtained by anodically oxidizing the top and the side of discarded aluminum cans separately, and the pore sizes of both membranes can be enlarged by using 5 wt % phosphoric acid with different pore-widening times. The physical, chemical, and morphological properties of T-AAO and S-AAO membranes are analyzed by scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), thermogravimetric analysis (TGA), X-ray diffraction (XRD) (wide-angle X-ray scattering (WAXS) and grazing-incidence wide-angle X-ray (GIWAX)), X-ray fluorescence (XRF), electron backscatter diffraction (EBSD), and contact angle measurement, and the properties are also compared with those of AAO membranes made by high-purity (99.997%) aluminum sheets. The thermal annealing method is also applied to aluminum cans for fabricating more stereoscopic AAO membranes attributed to changes of primary lattice planes. One of the application values of T-AAO and S-AAO membranes is demonstrated by infiltration of polymer materials, poly(methyl methacrylate) (PMMA) and polystyrene (PS), into the nanopores of the membranes with the thermal annealing method, followed by releasing the polymer nanoarrays from the T-AAO and S-AAO membranes with NaOH solutions. Moreover, functional self-cleaning surfaces of T-AAO and S-AAO membranes are produced by grafting hydrophobic octadecyltrimethoxysilane (OTMS) and 1H,1H,2H,2H-perfluorodecyltriethoxysilane (PFDTES) molecules. This work not only provides a feasible approach to recycle and upcycle aluminum waste but also gives a promising strategy for fabricating widely applicable nanomaterials in eco-friendly and low-cost ways.

Study on Preparation Technology and Heat Conduction Mechanism of High-Purity & Ultra-Fine Alumina Powder from Scrap Aluminum Cans

Technology for High Pure Aluminum Oxide Production from Aluminum Scrap

Preparation of micron-sized alumina powders from aluminium beverage can by means of sol-gel process

Properties and composition of the spent electrolyte for premium circulation mediated by Al-air batteries.

A new process for efficient purification of 6061 aluminum alloy scrap under semi-solid and super-gravity conditions

Mechanism study of synergistic aluminum extraction and purification by ammonium for high-value conversion of secondary aluminum dross

Low-Calcination Temperature to Synthesize A-Alumina From Aluminium Waste Can Using Sol-Gel Method

Preparation of Aluminum Hydroxide During the Synthesis of High Purity Alumina via Aluminum Anodic Oxidation

Aluminum–iron separation in high‐acid leaching solution and high‐purity alumina preparation

Upcycling Discarded Aluminum Cans into Nanoporous Membranes as an Eco-Friendly and Cost-Effective Strategy for Fabricating Polymer Nanoarrays and Self-Cleaning Surfaces

Extraction of alumina from aluminum dross by a non-hazardous alkaline sintering process: Dissolution kinetics of alumina and silica from calcined materials

Melt refining and purification processes in Al alloys: a comprehensive study

A systematic review of the production of high-purity aluminum: applications, preparation, and mechanisms

Impurity Behavior in Aluminum Extraction by Low-Temperature Molten Salt Electrolysis

Preparation of aluminium-magnesium alloys and some valuable salts from used beverage cans

Process Research on Preparation Ultrafine Alumina Power from Aluminium Ash

Study on the Recycling of Valuable Metals in Spent Al2O3-based Catalyst

Performance Optimization of Original Aluminum Ash Coating

High- and Ultra-High-Purity Aluminum, a Review on Technical Production Methodologies

Comprehensive treatments of aluminum dross in China: A critical review

Preparation of Aluminum Hydroxide From Aluminum Ashes