Abstract:Red mud, which could cause numerous problems to the environment, is a hazardous waste generated from the alumina smelting industry. In general, the storage and harmless utilization of red mud are hard to implement due to its fine particle size and high alkalinity. This study put forward a novel process to separate iron (MgFe2O4) and alumina (Al2O3) in red mud by a magnetization sintering method. The magnesium oxide was added to transform the nonmagnetic Fe2O3 into magnetic MgFe2O4 to achieve physical separation of iron-bearing minerals, and the alumina-bearing minerals were converted into dissoluble NaAlO2 minerals in a one-step reaction. The atmospheric pressure leaching process was adopted in this study for alumina resource recovery. To achieve clean alumina production, the silicate in the leaching solution was removed by adding the slightly soluble CaSO4, and the entire process becomes clean and harmless. The feasibility of the process was verified by thermodynamic analysis, and a series of experiments were performed to detect the optimum MgO/(Fe2O3 + MgO) ratio and the calcining and leaching conditions. The morphological and mineralogical characteristics of modified red mud, leaching red mud, and magnetic separation product were studied by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) energy dispersive spectroscopy (EDS). It was observed that under the optimal conditions with MgO/(Fe2O3 + MgO) of 14.89% to recover iron and aluminum, the corresponding recovery rates were 67.54% and 73.01% respectively, and the iron grade was 30.46%. The EDS results showed that the obtained Mg/Fe ratio of the magnetic separation product was 0.4677–0.528, which is slightly different from that of the standard MgFe2O4 at 0.5. This new method can promote the development of comprehensive utilization of red mud and iron production.

X-Ray Powder Diffraction and Mössbauer Study of Red Mud Residue from Alumina Production

Effects of thermal treatments on the characterisation and utilisation of red mud with sawdust additive

Study on Phases and Thermal Behavior of Bayer Red Mud of Pingguo Aluminum Plant

Extraction of Iron and Alumina from Red Mud with a Non-Harmful Magnetization Sintering Process

Numerical Simulations of the Impact of CaO/Al2O3 on the Structure and Crystallization Behavior of Red Mud

Investigation of the smelting reduction mechanism and of iron extraction from high-iron red mud

Application of Bayer red mud for iron recovery and building material production from alumosilicate residues

Study on Magnetization Roasting Kinetics of High-Iron and Low-Silicon Red Mud

Structural investigation relating to the cementitious activity of bauxite residue — Red mud

Characterization and Risk Assessment of Red Mud Derived from the Sintering Alumina Process

Simultaneous Extraction of Fe, Al, Sc and Cr from Red Mud by Ammonium Sulfate Calcination in the Range 250–400°C

Comprehensive Recovery of Iron and Aluminum from Ordinary Bayer Red Mud by Reductive Sintering–Magnetic Separation–Digesting Process

Microstructure and wear resistance of red mud iron alloy with chromium and titanium

Iron Recovery from Red Mud Using Carbothermic Roasting with Addition of Alkaline Salts

Influence of Sodium Sulfate Addition on Iron Grain Growth during Carbothermic Roasting of Red Mud Samples with Different Basicity

Kinetics and Mechanism of Red Mud Carbothermic Reduction and Reduced Iron Grain Growth: An Influence of Sodium Sulfate

Iron Extraction from Red Mud using Roasting with Sodium Salt

Electron Probe Microanalysis for Revealing Occurrence Mode of Scandium in Bayer Red Mud

Red mud treated with KOH: synthesis of sustainable materials from waste for water treatment

Toughening Mechanism of CaAl12O19 in Red Mud–Al2O3 Composite Ceramics

Effects of Sintering Temperature on Phase and Physical Properties of Hejin Red Mud