Abstract:In this paper, we propose a new method to analyze airport pavement bearing capacity using vibration in runways during aircraft taxiing. The new method overcomes shortcomings of existing tests, such as flight suspension and simulated loading. Between aircraft take-off and landing, acceleration sensors are arranged on the surface of the pavement far from the centerline, and the in-situ responses of the pavement under aircraft loads are collected during aircraft operations. The fundamental frequencies of the pavement are obtained by fast Fourier transformation of the measured accelerations, and are used to modify the parameters of a pavement finite element model built according to a design blueprint. By comparing the fundamental frequencies of the measured and calculated signals, the soil modulus is back-calculated. To implement this test method and ensure the accuracy of bearing capacity evaluation, aircraft dynamic loads are obtained by solving dynamic balance equations of the aircraft-pavement coupled system, and the vibration response of the pavement and sensitivity analysis of the fundamental frequencies are introduced. The results show that the fundamental frequencies at the center of the pavement are basically the same as those at the far side on the cross section; the fundamental frequencies in the depth direction remain constant, but the amplitude of the frequency spectrum decreases. The effect of the soil resilient modulus on the vibration frequency is most significant. The fundamental frequency increases from 6.02 to 10.55 Hz when the soil dynamic resilient modulus changes from 91 to 303 MPa. The effects of surface thickness and base thickness on the vibration frequency are less significant, and there is minimal influence when changing the dynamic elastic moduli of the surface layer or base layer. Field test results indicate the efficacy of the method of vibration measurement at the pavement surface to estimate the layer modulus of airport pavement.

Investigation of shear failure in airport asphalt pavements under aircraft ground manoeuvring

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Elastoplastic Analysis of Asphalt Concrete Pavement

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Turning Maneuver Effect on Near-Surface Airfield Pavement Responses

Numerical Analysis on Deformation of Pavement and Soft Clay Ground Interaction for Cyclic Loads

Analysis of Dynamic Stress Path in Inhomogenous Subgrade under Moving Aircraft Load

Dynamic response analysis of inhomogeneous subgrade subjected to moving aircraft loads

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Airport pavement design considering areal load distribution

Experimental and numerical prediction of airport pavement over expansive subgrade stabilized by asphalt layers

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

A systematic review of structural design methods and nondestructive tests for airport pavements

Dynamic response analysis of airport pavements during aircraft taxiing for evaluating pavement bearing capacity

Dynamic viscoelastic response of an instrumented asphalt pavement under various axles with non-uniform stress distribution

Dynamic response of the inhomogeneous pavement structure containing a buried fault zone under the moving aircraft loads

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks