Abstract:In human implant materials, beta (β) titanium alloys have been extensively used because of their excellent biocompatibility and lower elasticity modulus; however, they have poor hardness and wear resistance. Herein, vacuum induction nitriding technology is used to strengthen the surface of a Ti–25Nb–3Zr–2Sn–3Mo (TLM) alloy. The nitriding layer microstructure is characterised using X-ray diffraction (XRD), scanning electron microscopy (SEM)–energy dispersive spectrometry (EDS) and optical microscopy (OM). The mechanical properties of nitriding layer are tested using cross-sectional hardness gradient and nano-indentation. Furthermore, the wear resistance and mechanism of nitriding layer are examined using a self-made reciprocating wear tester, a three-dimensional (3D) profilometer and SEM, respectively. The results demonstrate that an approximately 30-μm thick nitriding layer is formed on the TLM alloy surface after induction nitriding treatment. Interestingly, it forms a gradient structure that can improve the hardness and wear resistance of samples. Moreover, at a maximum test load of 10 N, the abrasion loss of the raw sample is 463 times that of the nitriding sample. Furthermore, the friction coefficient of the raw sample significantly exceeds that of the nitriding sample at three test loads. The wear mechanism between the friction pair Al2O3 ball and the raw sample is primarily a combination of abrasive and adhesive wear, whereas that of the nitriding sample is primarily abrasive wear. The results demonstrate that the nitriding layer significantly improves the wear performance of TLM alloys.

A novel rare earth-salt bath nitriding of TC21-DT titanium alloy

Effect of rare earth addition on diffusion kinetics of borided TC21-DT titanium alloy

Effect of rare earth (RE) on pack boronising process of titanium alloy

Acceleration of Plasma Nitriding at 550 °C with Rare Earth on the Surface of 38CrMoAl Steel

Plasma Nitridation and Mechanical Properties of Pure Titanium Casts

Characterisation of Rare Earth Assisted Plasma Carbonitrided TiNi Alloys

Effect of rare earth elements on plasma electrolytic carbonitriding of Ti–6Al–4V alloy

An effective and innovative application of rare-earth plasma nitriding on high entropy alloy CoCrCuFeNi

Research on Cyclic Ion Nitriding Technology Catalyzed by Rare Earth for 2cr13 Stainless Steel

Study on the Influences of Adding Rare Earth Ce on the Precipitation Behaviors of TiN Inclusions in 20CrMnTi

Microstructure and wear behavior of inductive nitriding layer in Ti–25Nb–3Zr–2Sn–3Mo alloys

Low-Temperature Plasma Nitriding of 3Cr13 Steel Accelerated by Rare-Earth Block

Effect of Rare Earth Elements on the Erosion Resistance of Nitrided 40cr Steel

Control of Coarse Precipitates of Titanium Nitride in High-Strength Low-Alloy Steel

Effects of rare earth Ce on TiN inclusion modifications in 20CrMnTi steel under deoxygenation conditions of Si–Ca–Ba alloy

Study on In Situ Synthesized Titanium Matrix Composites

The Role of Ti in Cavitation Erosion and Corrosion Behaviours of NAB Alloy in 3.5 % NaCl Solution

Enhanced plasma nitriding assisted by combining hollow cathode discharge with rare earth oxide particles for iron-based metals

Enhancement of Wear and Corrosion Resistance of Ti6Al4V Alloy through Hollow Cathode Discharge-Assisted Plasma Nitriding

Effect of Re Addition on Microstructure and Mechanical Properties of Nb-Si-Ti-Al-Cr-Hf Ultrahigh Temperature Alloys

Mechanical Properties of Biomedical ß-Type Titanium Alloy with Rare-Earth Metal Oxide Particles Formed by Rare-Earth Metal Addition