Abstract:Electrochemical capacitors using neutral aqueous electrolytes are safer and cheaper and allow diverse current collectors compared with the counterparts using organic or acidic/alkaline electrolytes. Two-dimensional (2D) MXenes have been demonstrated as the high-capacitive materials with high rate performance. However, MXene electrodes often exhibit a limited capacitance in neutral electrolytes, where the reversible electrochemical reactions rely greatly on the structural and surface properties of MXenes depending on their synthesis methods. Herein, a simple and highly efficient strategy, which combines HF etching of Ti3AlC2 powder and subsequent amine-assisted delamination at a low temperature, is developed to synthesize 2D Ti3C2Tx MXenes. The comprehensive results demonstrate that the enlarged interlayer spacing and the presence of more −O-containing functional groups synergistically contribute to the improvement of capacitive performance in neutral electrolytes. The 2D Ti3C2Tx MXenes show excellent electrochemical performance in various neutral electrolytes, and a high specific gravimetric capacitance of 149.8 F/g is achieved in 1.0 M Li2SO4. Furthermore, the flexible solid-state supercapacitors (SCs) with a neutral PVA/LiCl gel electrolyte possess a superior areal capacitance (163.1 mF/cm2) and high energy density (17.6 μWh/cm2 at 0.07 mW/cm2), together with high user safety. This work provides a promising guideline of synthesis strategy for high-capacitive MXenes used in neutral electrolytes, which may promote the development of safe and flexible power sources with a high energy density.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c06161.Fractions extracted from Ti 2p and O 1s XPS spectra for Ti3C2Tx-TMAOH and Ti3C2Tx-HF samples; SEM images of raw Ti3AlC2 crystals and multilayered Ti3C2Tx after diluted HF etching of Ti3AlC2 for 2 h; digital photographs showing Tyndall scattering effects of Ti3C2Tx-TMAOH nanosheets dispersed in NMP; SEM image of the Ti3C2Tx-HF sample; AFM image of Ti3C2Tx-TMAOH nanosheets; XPS Al 2p and F 1s spectra of Ti3AlC2, Ti3C2Tx-HF, and Ti3C2Tx-TMAOH; XPS C 1s spectra of Ti3C2Tx-HF and Ti3C2Tx-TMAOH and their component peak fitting; CV curves of Ti3C2Tx-HF and Ti3C2Tx-TMAOH samples at scan rates from 0.5 to 100 mV/s in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4; GCD curves of Ti3C2Tx-HF and Ti3C2Tx-TMAOH samples at current densities from 0.5 to 50 A/g in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4; electrochemical performance of the freestanding Ti3C2Tx-TMAOH film electrode including CV curves, specific capacitance vs scan rate, GCD curves, and EIS spectra in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4 (PDF)This article has not yet been cited by other publications.

Synthesis and electrochemical performance of Ti3C2Tx with hydrothermal process

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

A high-performance supercapacitor electrode based on freestanding N-doped Ti3C2Tx film

Synthesis of a MoO3/Ti3C2Tx composite with enhanced capacitive performance for supercapacitors

Significantly Enhanced Oxidation Resistance and Electrochemical Performance of Hydrothermal Ti3C2Tx MXene and Tannic Acid Composite for High-Performance Flexible Supercapacitors

Room Temperature Oxidation of Ti3C2 MXene for Supercapacitor Electrodes

Ti3C2Tx/CDs@MnO2 composite as electrode materials for supercapacitors: synthesis and electrochemical performance

New Ti3-yNbyC2Tx MXenes As High-Rate and Ultra-Stable Electrode Materials for Supercapacitors

Hydrothermal Synthesis of Cobalt Sulfide Nanotubes: the Size Control and Its Application in Supercapacitors

Synthesis of Nitrogen-Doped Two-Dimensional Ti3C2 with Enhanced Electrochemical Performance

Significantly Enhanced Oxidation Resistance and Electrochemical Performance of Hydrothermal Ti 3 C 2 T x MXene and Tannic Acid Composite for High-Performance Flexible Supercapacitors

Supercapacitor of TiO2 prepared by hydrothermal method

Hierarchical architecture of Ti3C2@PDA/NiCo2S4 composite electrode as high-performance supercapacitors

Molten salt-shielded synthesis of Ti3AlC2 as a precursor for large-scale preparation of Ti3C2Tx MXene binder-free films electrode supercapacitors

A Facile Etching Route for Preparing Ti 3 C 2 MXene with Enhanced Electrochemical Performance in Silver Nitrate Solution

Amine-Assisted Delaminated 2D Ti 3 C 2 T x MXenes for High Specific Capacitance in Neutral Aqueous Electrolytes

Ti3−yNbyC2T MXenes as high-rate and ultra-stable electrode materials for supercapacitors

In Situ Ice Template Approach to Fabricate Ag Modified 3D Ti3C2Tx Film Electrode for Supercapacitors

Simplified Synthesis of Fluoride-Free Ti 3 C 2 T x via Electrochemical Etching toward High-Performance Electrochemical Capacitors

Synthesis of Ni-MOF/Ti3C2Tx hybrid nanosheets via ultrasonific method for supercapacitor electrodes

Ti3C2TX@PANI core-shell heterostructure assembled into 3D porous hydrogel as free-standing electrodes for high-energy supercapacitors