Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> Purpose</h3><p>Dual energy (DE) x‐ray imaging has many clinical applications in radiography, fluoroscopy, and CT. This work characterizes a prototype dual layer (DL) flat panel detector (FPD) and investigates its DE imaging capabilities for applications in 2D radiography/fluoroscopy and quantitative 3D cone‐beam CT. Unlike other DE methods like kV switching, a DL FPD obtains DE images from a single exposure, making it robust against patient and system motion.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Methods</h3><p>The DL FPD consists of a top layer with a 200 µm‐thick CsI scintillator coupled to an amorphous silicon (aSi) FPD of 150 µm pixel size and a bottom layer with a 550 µm thick CsI scintillator coupled to an identical aSi FPD. The two layers are separated by a 1 mm Cu filter to increase spectral separation. Images (43×43 cm<sup>2</sup> active area) can be read out in 2×2 binning mode (300 µm pixels) at up to 15 frames per second. Detector performance was first characterized by measuring the MTF, NPS, and DQE for the top and bottom layers. For 2D applications, a qualitative study was conducted using an anthropomorphic thorax phantom containing a porcine heart with barium‐filled coronary arteries (similar to iodine). Additionally, fluoroscopic lung tumor tracking was investigated by superimposing a moving tumor phantom on the thorax phantom. Tracking accuracies of single energy (SE) and DE fluoroscopy were compared against the ground truth motion of the tumor. For 3D quantitative imaging, a phantom containing water, iodine, and calcium inserts was used to evaluate overall DE material decomposition capabilities. Virtual monoenergetic (VM) images ranging from 40 to 100 keV were generated, and the optimal VM image energy which achieved the highest image uniformity and maximum contrast‐to‐noise ratio (CNR) was determined. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Results</h3><p>The spatial resolution of the top layer was substantially higher than that of the bottom layer (top layer 50% MTF = 2.2 mm<sup>‐1</sup>, bottom layer = 1.2 mm<sup>‐1</sup>). A substantial increase in NNPS and reduction in DQE was observed for the bottom layer mainly due to photon loss within the top layer and Cu filter. For 2D radiographic and fluoroscopic applications, the DL FPD was capable of generating high‐quality material‐specific images separating soft tissue from bone and barium. For lung tumor tracking, DE fluoroscopy yielded more accurate results than SE fluoroscopy, with an average reduction in the root‐mean‐square error (RMSE) of over 10×. For the DE CBCT studies, accurate basis material decompositions were obtained. The estimated material densities were 294.68 ± 17.41 and 92.14 ± 15.61 mg/ml for the 300 and 100 mg/ml calcium inserts respectively, and 8.93 ± 1.45, 4.72 ± 1.44, and 2.11 ± 1.32 mg/ml for the 10, 5, and 2 mg/ml iodine inserts respectively, with an average error of less than 5%. The optimal VM image energy was found to be 60 keV. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Conclusions</h3><p>We characterized a prototype DL FPD and demonstrated its ability to perform accurate single‐exposure DE radiography/fluoroscopy and DE‐CBCT. The merits of the dual layer detector approach include superior spatial and temporal registration between its constituent images, and less complicated acquisition sequences.</p></section>

A novel EPID design for enhanced contrast and detective quantum efficiency

A high DQE water-equivalent EPID employing an array of plastic-scintillating fibers for simultaneous imaging and dosimetry in radiotherapy

Study of a prototype high quantum efficiency thick scintillation crystal video-electronic portal imaging device

Improved temporal performance and optical quantum efficiency of avalanche amorphous selenium for low dose medical imaging

DESIGN OF A NEW DEPTH ENCODING DETECTOR FOR PET

Low-dose megavoltage cone-beam CT imaging using thick, segmented scintillators

MTF and DQE enhancement using an apodized-aperture x-ray detector design

Characterization and potential applications of a dual‐layer flat‐panel detector

TU-D-352-01: Beyond the Limits of Active Matrix Flat-Panel Imagers: A Comparative Performance Assessment of X-Ray Converter Enhancement Versus Innovative Active Pixel Sensor Architectures

Pixel Response-Based EPID Dosimetry for Patient Specific QA.

Design Optimization of A Triple-Layer Flat-Panel Detector for Three-Material Decomposition

Direct Conversion X-ray Detector with Micron-Scale Pixel Pitch for Edge-Illumination and Propagation-Based X-ray Phase-Contrast Imaging

Dual energy imaging with a dual-layer flat panel detector

Optimization of the design of thick, segmented scintillators for megavoltage cone-beam CT using a novel, hybrid modeling technique

Design and Optimization of Direct-Conversion Photon-Counting Detector for Dual-Energy Ct Imaging

Monte Carlo model of a prototype flat-panel detector for multi-energy applications in radiotherapy

Comprehensive evaluations of a prototype full field-of-view photon counting CT system through phantom studies

A layered single-side readout DOI TOF-PET detector

First linac‐mounted photon counting detector for image guided radiotherapy: Planar image quality characterization

A High Count-Rate and Depth-of-Interaction Resolving Single Layered One-Side Readout Pixelated Scintillator Crystal Array for PET Applications

Development of an Electronic Portal Imaging Device Dosimetry Method