Abstract:The separation of lignin from black liquor is an attractive option to consider for pulp mills. In modern pulp mills, lignin extraction offers the opportunity of withdrawing an energy surplus in the form of a solid biofuel. The introduction of lignin separation can de-bottleneck pulp mills in which pulp production is limited by recovery boiler capacity. Separated lignin can be used within the mill, e.g. by replacing fuel oil in the lime kiln or fired in a power boiler, or externally e.g. in CHP plants. Today, only half of the wood material (i.e. the cellulose) is used for the production of valuable products. In a more futuristic perspective, separated lignin can be used as a raw material for the production of green chemicals and/or materials replacing oil as a raw material, thus increasing the value created from the wood material. In this thesis, the extraction of lignin in pulp mills, in particular by precipitation from black liquor, was studied with the focus being on quantifying separation properties of the lignin material. After precipitation, the lignin is filtered and washed. Laboratory studies showed that precipitation and filtration is a rather straight-forward process if the right conditions in terms of pH and temperature are used during precipitation. While lignin precipitated from different softwood kraft black liquors taken from the evaporators showed comparable filtration properties, lignin from membrane concentrated black liquors proved to be more difficult to filter. Direct washing of lignin filter cakes proved to be difficult; problems with plugging and uneven washing, in addition to large yield losses, were encountered. These problems were found to be caused by large gradients in pH and ionic strength in the lignin filter cake during washing. A novel washing method was proposed and developed to solve these problems. This process was investigated in laboratory, bench and pilot scale equipment with excellent results in terms of final purity of the lignin product and very low yield losses during separation. Filtration and washing characteristics were quantified and found to be similar in the three different scales that were studied. During the pilot scale trial, more than 8 tonnes of lignin could be produced using the novel separation method, with high levels of purity ( 60%) and calorific value (LHV 25.4 MJ/kg).

Improvement of the technology for reprocessing black liquors from kraft pulp production

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Chemical modification of kraft lignin using black liquor heat treatment

Recovery and Enrichment of Organic Acids from Kraft Black Liquor by an Adsorption-Based Process

Treatability Of Kraft Spent Liquor By Microfiltration And Ultrafiltration

Pilot-scale nanofiltration and techno-economic evaluation of lignin recovery from kraft black liquor

Research on the Pretreatment of Black Liquor Produced from Refined Cotton Production by Acidification-Coagulation-Micro-electrolysis

Highly efficient lignin removal from the waste liquor of chemical pulping with an integrated polyaluminium chloride-assisted acidification/activated carbon adsorption process

Lignin recovery from spent alkaline pulping liquors using acidification, membrane separation, and related processing steps: A review

Inorganic Chemistry during Pyrolysis, Gasification, and Oxyfuel Combustion of Kraft Pulping Black Liquor

Electrochemical acidification of Kraft black liquor by electrodialysis with bipolar membrane: Ion exchange membrane fouling identification and mechanisms

Preparation of Pulp Refining Additive from Paper Sludge Through Organic Modification

The treatment of black liquor from straw pulp by electrolytic process

Precipitation and separation of lignin from kraft black liquor

Treatment of Wastewater of Acid-Precipitation Black Liquor with Resin Adsorption Process

Enhanced Performance of Lignin Recovery with a Carbon Dioxide Acidification Method

Kinetic analysis of kraft lignin conversion via the Fenton process: process optimization and stochastic modelling

The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor

Pretreatment of black liquor from refined cotton production by acidification and adsorption using activated carbon fiber

Addition of green and black liquor in kraft pulping of Eucalyptus dunnii wood: possible solutions for the problems with kraft pulping caused by high calcium content

Catalytic influence of alkali and alkali earth metals in black liquor on the gasification process: a review