Abstract:The application of membrane technology on black liquor from pulp mills has been greatly limited due to the high temperature, high pH value and high suspended solid (SS) concentration of the black liquor, although many researchers have made a great effort. Attention has been paid to the inorganic membrane in this paper because it has the advantages of resistance to acid and alkali, a long life span, etc. The aim of this work was to study the feasibility of black liquor treatment by various organic UF and inorganic MF membranes. Based on the batch experiments with 200 kPa transmembrane and a temperature of 30degreesC, the results showed that approximately 80% lignin retention was achieved with MF membranes and 90% lignin retention with UF membranes. The COD reduction in the permeation mainly resulted from lignin rejection. Both MF and UF membranes could reject silica and their efficiencies were all over 80%. The observed total filtration resistance was evaluated for the intrinsic resistance (R-m), adsorption (R-a), pore plugging (R-pp), and concentration polarization (R-cp), using a series resistance model based on the pure water flux. The concentration polarization dominated the process for the inorganic membranes. However, the distributions of the filtration resistance for the organic membrane depended on the materials characteristics and the pore sizes. By a 40-day continuous experiment with a crossflow velocity of 2.3 m/s and transmembrane pressure of 200 kPa, the flux of the 0.2 mu inorganic MF membrane was 200 l/m(2)h flux at 32degreesC after operation for 374 h, and 400 l/m(2)h at 63degreesC for 625 h. During the operation process, no cleaning was carried out and the smooth operation period was more than 40 days. The experimental results highlighted the treatment of black liquor by membrane separation.

Pretreatment of black liquor from refined cotton production by acidification and adsorption using activated carbon fiber

Research on the Pretreatment of Black Liquor Produced from Refined Cotton Production by Acidification-Coagulation-Micro-electrolysis

Treatment of Wastewater of Acid-Precipitation Black Liquor with Resin Adsorption Process

Reductions in Cod and Acute Toxicity of Wastewater Generated from Refined Cotton Production Using Activated Carbon Fibre (ACF)

A Study on the Decolorizing Condition of the Xylitol Fermenting Liquor

Highly efficient lignin removal from the waste liquor of chemical pulping with an integrated polyaluminium chloride-assisted acidification/activated carbon adsorption process

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

PRETREATMENT OF REFINED COTTON PRODUCTION WASTEWATER BY ADSORPTION ON ACTIVATED COKE

Complexation modelling and oxidation mechanism of organic pollutants in cotton pulp black liquor during iron salt precipitation and electrochemical treatment

Investigation of black liquor-derived carbon for removal of Cr(VI): Comparison with lignin-derived carbon

Comparative Study on the Treatment of Straw Pulping Black Liquid by Acid-Precipitation and Alkali-Precipitation

Treatability Of Kraft Spent Liquor By Microfiltration And Ultrafiltration

Rapid Removal of Dyes by Carbonized Sludge: Process, Effects of Environmental Factors, and Mechanism

Preparation and Characterization of Activated Carbon Fiber (ACF) from Cotton Woven Waste

Dye adsorption properties of carbonized sludge and its application for treating dyeing wastewater

The treatment of black liquor from straw pulp by electrolytic process

Adsorption Study of Lignin Removal from Recycled Alkali Black Liquor by Adsorption Resins for Improved Cellulase Hydrolysis of Corn Straw

Enhancing the valorization of pulping black liquors in production effective aerogel-carbon nanostructure as adsorbents toward cationic and ionic dyes

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Adsorption Characteristics of Carbon Tetrachloride from Aqueous Solution Onto Polyacrylonitrile-Based Activated Carbon Fiber