Abstract:Publication date: 19 June 2023 Source: International Journal of Engineering Research in Africa Vol. 64 Author(s): Favour C. Ibezim, Idowu I. Olateju, Abdulwahab Giwa Ammonia can be produced from a wide range of raw materials such as coal, natural gas, coke and oil. Coal gasification is a process that converts biomass or fossil fuel-based carbonaceous materials into CO, H2 and CO2. A cryogenic air separation process was used to obtain oxygen from air because of high purity and high amount of oxygen, which will be used for coal gasification. For an ammonia synthesis process using pure oxygen gasification, the energy consumption of cryogenic air separation occupies a large proportion. The aim is to reduce energy consumed in the ammonia plant. The models of the process were developed with the aid of Aspen Plus. The energy consumption of the different processes was obtained through energy analysis, economic analysis and sensitivity analysis. From the three simulations, it can be seen that Simulation 3 produced oxygen with the highest purity of 0.979. From the energy analysis, the energy consumed on the total utilities in Simulation 1 was 5.626×1010 BTU/h with an energy savings of 1.55%, the energy consumed in Simulation 2 was 5.286×1010 BTU/h with an energy savings of 1.53% while the energy consumed on the total utilities in Simulation 3 was 1.425×109 BTU/h with an energy savings of 74.90%. Simulation 3 consumed the least energy. The economic analysis showed the total cost of each plant for a 10-year duration. Simulation 1 had a total operating cost of 42.083 billion USD/year, Simulation 2 had a total operating cost of 41.9615 billion USD/year and Simulation 3 had a total operating cost of 918.841 million USD/year. Therefore, Simulation 3 consumed the least cost of total operation. It can also be seen that the higher the energy consumption in a plant, the higher the total cost of the plant as Simulation 3 consumed the least energy, which justified that. Simulation 3 is the air separation plant that optimises the energy consumption, thereby reducing the energy consumed in the whole ammonia plant.

Experience obtained from computer simulation of CO-conversion and gas purification stages of an ammonia process based on partial oxidation of heavy oil

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Simulation of multi-fluidized-bed in series for methanol to olefins

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Process simulation for CO; absorption with mixed amine solution

Process Simulation of Diesel into Aromatics and Carbon Nanotubes: A Techno and Economic Analyses.

A Detailed Process and Techno-Economic Analysis of Methanol Synthesis from H2 and CO2 with Intermediate Condensation Steps

Electro-thermal treatment optimization of high concentration ammonia nitrogen by gaseous oxidation in liquid phase (GOLP)

Conceptualization and process simulation of a CO2 based methanol production plant

Dynamic Simulation Analysis and Optimization of Green Ammonia Production Process under Transition State

Methanol production by CO2 hydrogenation: Analysis and simulation of reactor performance

Modeling and improving the scrubbing efficiency of an intensified ammonia process for coke oven gas purification

Comprehensive evaluation of an ionic liquid based deep purification process for NH3-containing industrial gas

Towards technology, economy, energy and environment oriented simultaneous optimization of ammonia production process: Further analysis of green process

Process Simulation for CO2 Absorption with Mixed Amine Solution

Liquid-phase CO 2 hydrogenation to methanol synthesis: Solvent screening, process design and techno-economic evaluation

Optimization of Energy Consumption of a Synthetic Ammonia Process

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization