Abstract:We present a procedure for the design and construction of a passive, multipole, mechanical high-stop vibration isolator. The isolator, consisting of a stack of metal disks connected by thin wires, attenuates frequencies in the kilohertz range, and is suited to both vacuum and cryogenic environments. We derive an approximate analytical model and compare its predictions for the frequencies of the normal modes to those of a finite element analysis. The analytical model is exact for the modes involving only motion along and rotation about the longitudinal axis, and it gives a good approximate description of the transverse modes. These results show that the high-frequency behavior of a multi-stage isolator is well characterized by the natural frequencies of a single stage. From the single-stage frequency formulae, we derive relationships among the various geometrical parameters of the isolator to guarantee equal attenuation in all degrees of freedom. We then derive expressions for the attenuation attainable with a given isolator length, and find that the most important limiting factor is the elastic limit of the spring wire material. For our application, which requires attenuations of 250 dB at 1 kHz, our model specifies a six-stage design using brass disks of approximately 2 cm in both radius and thickness, connected by 3 cm steel wires of diameters ranging from 25 to 75 microns. We describe the construction of this isolator in detail, and compare measurements of the natural frequencies of a single stage with calculations from the analytical model and the finite element package. For translations along and rotations about the longitudinal axes, all three results are in agreement to within 10% accuracy.

Vibration protection of laptop hard disk drives in harsh environmental conditions

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Vibration characteristics and isolation in vibration-sensitive areas under moving vehicle load

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

A New Composite Vibration Isolator For Gearbox Found In Large Vessels

Response and Performance of A Nonlinear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Shock Excitations

Simulation And Design Of Composite Vibration Isolator For Spacecrafts

Active Vibration Isolation of a Micro-Manufacturing Platform Based on a Neural Network

Design and analysis of shock and random vibration isolation system for a discrete model of submerged jet impingement cooling system

MODAL TESTING AND FINITE ELEMENT MODELLING OF SUBSYSTEM IN HARD DISK DRIVE

Servo Controller Design for Triple-Stage Actuator in HDD to Compensate for High-Frequency Fan Vibration

Experimental Study on the Influence of Acoustic Environment on Read-and-Write Performance of Hard Disks

Modeling and compensation of low fly-height vibrations in high density Hard Disk Drive servo systems

Design Synthesis of Vibration Isolation System Considering Host Structure, Damping Layer, and Resilient Mounts

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Modeling and analysis of a viscoelastic micro-vibration isolation and mitigation platform for spacecraft

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Application of Laser Vibration Measurement Method in Notebook Computer Vibration Experiment

System Integration and Control Design of a Maglev Platform for Space Vibration Isolation

Development of a hybrid vibration isolator for better ride comfort and vehicle stability

Taber Vibration Isolator for Vacuum and Cryogenic Applications