Abstract:Earthquakes contain complex components in both the horizontal and vertical directions. However, most vibration control strategies work only in a single direction. The existing multi-dimensional isolation devices usually have complex designs and low damping ratios; hence, the stability of structures that incorporate the devices is currently insufficient. This study designs a novel multi-dimensional isolation and mitigation device based on viscoelastic damping technology (VE-MDIMD). The device consists of a core bearing and several cylindrical dampers, providing vibration control capacity in both the horizontal and vertical directions and a strong uplift resistance. To evaluate the device's performance, a series of dynamic tests are conducted on the cylindrical damper utilized in the device. The results show that the damper's mechanical properties exhibit a pronounced dependence on the frequency and amplitude, and its hysteresis curves become obviously nonlinear with increased deformation. Subsequently, to describe the behavior of the VE-MDIMD, a mechanical model is established which combines the construction of the device and the characteristics of the damper. Considering the limitations of existing models in fully capturing the nonlinear behavior of the damper, a novel multi-scale model is proposed based on the microstructure of viscoelastic material. The experimental verification confirms that the model can accurately capture the frequency and amplitude dependence, as well as the nonlinear hysteresis behavior, of the damper. Finally, the effectiveness of the VE-MDIMD is evaluated through the dynamic analysis of an actual structure. The arrangement of the device in the structure is optimized based on a multi-objective genetic algorithm available in Matlab (R2019b) and OpenSEES (Version 3.0.0). The results demonstrate the device's superiority in controlling both horizontal and vertical vibrations in the superstructure.

MODAL TESTING AND FINITE ELEMENT MODELLING OF SUBSYSTEM IN HARD DISK DRIVE

Joint clearance effects on dynamics of two-axis hydraulic vibration test system

Nano-and Micro-Actuations of Hard Disk’s Head Positioning System: Actuator Design and Evaluation of Performance

Study on Test System of Thermal-Vibration Combined Envir Onment under High Linear Acceleration

A Study on the Noise and Vibration Testing System for Automotive Final Drive

Modeling and compensation of low fly-height vibrations in high density Hard Disk Drive servo systems

Optimal Track Seeking Control of Dual-Stage Actuator for High Density Hard Disk Drives

Simulation and Test of Spindle Mode of Planetary Variable Speed Device

Dynamic Characteristics Analysis of the Hub Direct Drive-Air Suspension System from Vertical and Longitudinal Directions

Servo Controller Design for Triple-Stage Actuator in HDD to Compensate for High-Frequency Fan Vibration

Microtribology of Hard Disk Drive for High Density Recording

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Experimental Study on the Influence of Acoustic Environment on Read-and-Write Performance of Hard Disks

Model verification and vibration analysis of the four-disk hollow flexible shaft rotor system

Dynamic modeling and analysis for a drive axle gear transmission system

Adaptive Feedforward Reference Design for Active Vibration Rejection in Multi-Actuator Hard Disk Drives

Modal Test and Analysis of Electronic Cabinet

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device

In-Situ Measurement for Flying Height Modulation of Magnetic Head by Symmetrical Common-Path Heterodyne Interferometry

Modeling and Cancellation of Pivot Nonlinearity in Hard Disk Drive

Analysis of Head Disk Collision for Hard Disk Drives under Shock Excitations